Re: 2nd HD/old

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Rich Barry (rbarry_at_NOTsocal.rr.com)
Date: 07/17/04 

Date: Sat, 17 Jul 2004 12:42:50 -0700

    See if it works first. If yes, then connect the CD to Secondary slave.
"mikebon" <mikebon@discussions.microsoft.com> wrote in message
news:E48DC190-688F-4B83-9DDF-A3CEC6CC5E45@microsoft.com...
> The one that was in there already is 30GB. If I change it to the
secondary as master, do I then move the cd to primary slave?
>
> "Rich Barry" wrote:
>
> > Try installing it on the Secondary IDE channel as Master. What is
the
> > Capacity of the newer hard drive?
> > "mikebon" <mikebon@discussions.microsoft.com> wrote in message
> > news:3294EA23-9F5A-4D13-8798-74BC1A3768B5@microsoft.com...
> > > Posted: Fri Jul 16, 2004 4:53 pm Post subject: 2nd hard drive/old
> > >
> >
> --------------------------------------------------------------------------
> > ------
> > >
> > > I recently upgraded my TIVO system by putting a larger hard drive in.
> > Since I had the HD that I had taken out sitting around, I decided to put
it
> > into my PC. It is a 40 GB Maxtor. I put it in setting jumpers correctly,
> > etc. and all is well with the exception of it shows a total capacity of
9MB.
> > Any ideas?
> > >
> >
> >
> >

Relevant Pages

  • How to configure so that a CF is detected as Secondary or Primary MASTER IDE?
    ... But in order to do that, I need to configure so that the BIOS ... of the the target device detect the CF as a MASTER (either it is ... detect it as a Secondary SLAVE. ... MASTER, which is my objective from the beginning... ...
    (microsoft.public.windowsxp.embedded)
  • Re: How to configure so that a CF is detected as Secondary or Primary MASTER IDE?
    ... >> of the the target device detect the CF as a MASTER (either it is ... >> detect it as a Secondary SLAVE. ... >> MASTER, which is my objective from the beginning... ... >> Adaptor in order to resolve my problem. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Repost: Drive jumpers - was: Boot Timeout?
    ... > I currently have a HDD as the primary master, a CDROM as the secondary ... > master and a HDD as the secondary slave on my FBSD box. ...
    (freebsd-questions)
  • Re: cd-rom drive
    ... shows there is a floppy drive, a hard drive being the primary master ... The cd-om drive is attached to the secondary slave so should be the ... connection location on a secondary IDE ribbon cable (end connector / middle ...
    (comp.sys.ibm.pc.hardware.storage)