Re: ADSL/CABLE Internet connection question,PLEASE!

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Courtney (a_at_b.c)
Date: 06/29/04


Date: Tue, 29 Jun 2004 12:34:28 -0500

Alon Brodski wrote:
> Hello world!
>
> I have Windows XP Pro.
>
> I wonder if I could configure ONE computer to be connected to the Internet
> both using ADSL and CABLE.
> Of course,not simultanously.Just to have 2 Dial Up Connections (not
> analog,but PPP virtual ones) and use them one after another.
> ONE-PPTP (VPN) for Cable modem connection and SECOND-,say,PPPoATM for USB
> ADSL modem connection.
> I have a NIC and my cable modem is connected to it.It's LAN and I have
> 172.2X.X.X IP address from cable Co. at all times and when I want to connect
> to the Internet I Dial to my ISP and get an external IP address from
> it-80.179.X.X in my case...(each time it's different,naturally)-Open Access
> type.
> I have USB port and I can get a USB ADSL modem and use a PPPoA type of
> connection with it.
> And to use the same ISP (whether with the same or not account with it-it
> doesn't matter here)...
>
> The way I understand it-it should work OK...The unclear part is.....is it
> the NIC or the modem that gets 172.X.X.X address? In Cable....Some ppl don't
> have NIC's in their PC's...they use USB Cable modems...but they would still
> have that 172.X.X.X address...so it's not the NIC,but the modem who gets
> it....or am I wrong?
>
> If I also have a USB ADSL modem,then that modem would get a 10.X.X.X IP
> address from TELCO at all times
>
>
> So the bottom line is....the way I get it....my Cable modem would constantly
> have that 172.X.X.X address from Cable Co ( same as my NIC).AND my ADSL
> modem would constantly have 10.X.X.X address from TELCO.
> Whenever I use a Dial Up PPTP VPN adapter it would get a 80.179.X.X address
> from my ISP and I would get on the Internet using cable infrustructure.Then
> I disconnect...Then I'll use a PPoA connection (the virtual adapter is
> installed ,using a software that comes with the ADSL modem-Globespan ALE
> series...) and I would get also 80.179.X.X address from ISP,using my another
> account with it (the ADSL one).
>
>
Your request is kind of confusing...so here is my attmept at explaining
what I think is going on.

Cable: Regardless of how you connect, the cable modem itself never gets
an IP address. The modem itself does not support the IP protocol. The
first NIC it encounters, however, does get the IP address--whether it's
an actual NIC or an XP-emulated one (via USB interface). The NIC,
whatever type it is, will show up under Network Connections.

DSL: In this case, the IP address is assigned at the head end, before it
ever reaches your computer or your DSL modem. Like cable, if you connect
via USB, the connection will again appear in Network Connections.

Dial-Up: This works the same way as DSL; the IP address is assigned when
you dial up, not at your end, but at the router you dial into. Once
again, the modem will appear in Network Connections.

Now you can have any one, or all three network connections going at the
same time. You can also bridge any two (or all three) connections.
(Highly not recommended on a commercial network.)

Now, will you get an increase in network bandwidth by having multiple
connections going? Nope. Remember that the distant end server will
respond to the IP address that made the request, not all three, despite
all the websites that have you making registry changes to do this.

By the way, the following IP addresses are not routable over the
Internet and are dropped by the first router they encounter:

      10.0.0.0 - 10.255.255.255 (10/8 prefix)
      172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
      192.168.0.0 - 192.168.255.255 (192.168/16 prefix)

So, your 10.x.x.x and 172.x.x.x are not the IP addresses your service
providers use to allow you to access the Internet. These are most likely
  NAT'd addresses.

courtney sends....



Relevant Pages

  • Re: 6.1 they cant hear me
    ... There is no "Internet Gateway" heading under ... To do so, open the main Messenger window, click the ... > click Network and Internet connections then click Network Connections. ...
    (microsoft.public.windowsxp.messenger)
  • Re: Video but no audio
    ... All settings not already in place now tried with two ... Connections, we have Broadband, LAN or High-Speed ... Internet & 1394 Connection options. ... Network Connections, Local Area Connection, File menu, ...
    (microsoft.public.windowsxp.messenger)
  • Re: 6.1 they cant hear me
    ... both you and your contact should verify that the Windows XP Internet ... > click Network and Internet connections then click Network Connections. ... > be under the Internet Gateway heading) and choose Properties. ...
    (microsoft.public.windowsxp.messenger)
  • Re: slow dial up solutions
    ... We got a Dell xps410 with Vista Home Premium and it is constantly trying to download updates. ... Back then there were a couple of solutions though that the spread of DSL and Cable connections have made pretty much obsolete. ... Requires an ISDN modem, internal or external, not a big deal really if the switch is not to far from your locations. ... I was once given an old 486 that had two cards in it supporting 4 phone lines each. ...
    (alt.sys.pc-clone.dell)
  • Re: slow dial up solutions
    ... Between Windows updates and AV- ... connections this was not an all together unusual issue. ... Use and external modem with some of it's own memory and buffering. ... that had two cards in it supporting 4 phone lines each. ...
    (alt.sys.pc-clone.dell)