Re: not recognizing harddrive

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Pete Baker (petebkrAThotmailDOTcom)
Date: 04/30/04


Date: Fri, 30 Apr 2004 19:18:24 +0100


"godforbid" asked
> When doing a clean install of XP home, xp cannot find my
> harddrive. It is a SATA harddrive, with which I ran 98
> fine, without any special utilities.

Hi

**Unless you have a mainboard which includes native support for SATA...
which
you don't seem to have... if you did the standard IDE drivers would be
sufficient.**

In order to install XP you'll need to follow a particular method to install
the SATA drivers.

You'll need to have the SATA drivers available on a floppy disk ready for
the install process - if your mainboard manufacturer has not supplied a
floppy disk with the drivers you'll find them on your mainboard CD or
manufacturers website.

Make sure that, if you need to copy onto a floppy disk, you transfer all the
files from the SATA driver folder or from the download from your mainboard
manufacturers website - special attention needed to ensure you include all
necessary files.

Check your mainboard manual for the appropriate BIOS settings for booting
from SATA.

As the XP set-up begins you will be prompted to 'Press F6 to specify
third-party RAID or SCSI drivers' - at this point you should press F6 and,
when asked, insert the floppy disk with the relevant drivers. Select the
appropriate driver when asked and continue with the setup. There may be
some delays during this process and the set-up may appear to be continuing
without recognising the key-press - so don't panic.

When successful you'll be able to select the HD to install on. If you are
not given the HD you have not completed the procedure correctly. Check you
are using the correct drivers, have any relevant BIOS updates for your
mainboard, and try again.

Hope that helps
Pete
------------------



Relevant Pages

  • Re: MCE2005 will not clean install. Help!
    ... Removed sound card, tuner card and on-board firewire (also disabled fw ... Only one SATA HDD for now. ... I didn't have to F6 with drivers on a floppy. ... I didn't have to F6 with drivers and the install went flawlessly. ...
    (microsoft.public.windows.mediacenter)
  • Re: 2 SATA drives and 1 IDE drive Not Recognized
    ... All the drivers you need should be on the Disk that came with the Motherboard. ... But you should be able to use the Windows ... But I was unable to install the SATA drivers prior to ...
    (microsoft.public.windowsxp.general)
  • Re: Installing Windows XP on SATA HDD
    ... A couple of possibly related items about SATA and RAID: ... Install drivers from floppy via F6. ... I copied only the drivers to a floppy. ...
    (microsoft.public.windowsxp.hardware)
  • Re: MCE2005 will not clean install. Help!
    ... you shouldn't need 'SATA drivers'. ... I am not trying to "install an MCE system on top of, ... I'm stuck at the blue "Setup is starting WindowsXP" screen. ...
    (microsoft.public.windows.mediacenter)
  • Re: error message " no controller found"
    ... Is your computer now booting from SATA? ... controller drivers can be installed in the "normal" way, ... WinXP during Setup. ... telling how to use that floppy to install the drivers. ...
    (microsoft.public.windowsxp.hardware)