Re: USB ports don't work w/XP SP1
From: road rascal (road_rascal_no_spam_at_rascal.com)
Date: 04/11/04
- Next message: Jamie: ""Incorrect Function" Error using CD-RW drive"
- Previous message: Rochelle: "New keyboard not working"
- In reply to: Jim Macklin: "Re: USB ports don't work w/XP SP1"
- Next in thread: meriah: "Re: USB ports don't work w/XP SP1"
- Messages sorted by: [ date ] [ thread ]
Date: Sun, 11 Apr 2004 19:34:18 -0400
Unfortunately not for me and today's attempt has been one of several.
After plugging in the device, I get "USB device not recognized". It is
recognized under 98SE and on other machines with XP SP1 installed.
It happens the motherboard on the deviant machine has USB 1.1 support. The
alledged "malfunctioning device" will work fine on the USB 1.1 ports
although not at full speed.
I wonder if all the people who are having problems after installing SP1 on
XP also have both motherboard and PCI card USB.
"Jim Macklin" <p51mustang[threeX12]@xxxhotmail.calm> wrote in message
news:%23DlkP09HEHA.3896@TK2MSFTNGP11.phx.gbl...
> The "cure" that seems to work for me is to use the device
> manager to remove the USB port and hubs and to unplug the
> USB devices and reboot. This will force the OS to redetect
> and install the port and hubs with the latest drivers. Then
> install the USB devices one at a time so they get properly
> identified.
>
>
> "road rascal" <road_rascal_no_spam@rascal.com> wrote in
> message news:40792c7b$0$27650$61fed72c@news.rcn.com...
> | I have the same problem. After SP1 was applied, my
> Adaptec USB2Connect
> | 4000 stopped recognizing USB 2.0 devices.
> | I run Win98 on the same machine and the devices continue
> to run.
> |
> | I have the latest drivers from Adaptec installed plus all
> the hot fixes I
> | can find from Microsoft including the fix described in
> Microsoft Knowledge
> | Base Article - 822603 .
> |
> |
> | "Rich Barry" <rbarry@NOTsocal.rr.com> wrote in message
> | news:OSRNTh1HEHA.3444@TK2MSFTNGP11.phx.gbl...
> | > Meriah, check here
> | >
> http://support.microsoft.com/default.aspx?scid=kb;[LN];822603
> | >
> | > "Meriah" <mx@rhinoi.com> wrote in message
> | > news:1aebd01c41f55$eae601c0$a401280a@phx.gbl...
> | > > I installed SP1 last night, and all my USB devices
> | > > stopped
> | > > working. Device manager showed no problems with the
> ports
> | > > and hubs. I uninstalled SP1 and everything is back to
> | > > normal. Leaving it uninstalled would seem like a
> perfect
> | > > solution, except that I need to use Office 2003, which
> | > > requires SP1. The computer is a Sony Vaio, and a very
> | > > recent one, so it seems like they ought to be
> compatible.
> | > >
> | > > I did try restarts and swearing before the uninstall,
> but
> | > > no luck.
> | > >
> | > > Suggestions?
> | > >
> | > > Thanks!
> | > > Meriah...
> | >
> | >
> |
> |
>
>
- Next message: Jamie: ""Incorrect Function" Error using CD-RW drive"
- Previous message: Rochelle: "New keyboard not working"
- In reply to: Jim Macklin: "Re: USB ports don't work w/XP SP1"
- Next in thread: meriah: "Re: USB ports don't work w/XP SP1"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
