Re: CD & DVD

From: Cari \(MS-MVP\) (Newsgroups1_at_coribright.com)
Date: 03/30/04 

Date: Tue, 30 Mar 2004 14:15:42 -0800

Check the jumpers at the back of each drive. Ensure one is set to master
and one to slave (if they're connected via the same IDE cable). It sounds
as if both are currently master (or slave).

Cari
www.coribright.com

"bjzzer" <bjzzer@aol.com> wrote in message
news:15d8101c4169b$3b39c440$a501280a@phx.gbl...
> My CD ROM will comes up 'drive f: inaccesible' - it is a
> self installed ricoh cdr. My DVD RW opwns but shows no
> files in explorer.
> Any ideas please??
>
> Ta Bj

Relevant Pages

  • Re: Windows XP Wont Boot Up
    ... Did you change the jumpers on your 'failed' drive to slave or cable connect? ... Your new hard drive would be master and your 'failed' drive should be ... should boot from as both may be set as master. ... Check your drive instructions for details of setting the jumpers. ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: Replikations Frage
    ... vom Master auf den Slave kopiert hast und dabei die Permissions auf ... Die Datenbanken auf den Slave Server laufen ohne Probleme. ... # If you want to know which options a program support, ...
    (de.comp.datenbanken.mysql)
  • Re: When caveman Uhg invented fire
    ... be a business owner. ... But even the smallest "ownership" makes one a slave. ... Any "slave" can become the master. ...
    (alt.lang.asm)
  • Problems with IDE Cable Select (was: [opensuse] Installation disk detection problems
    ... Those master and slave jumpers are ancient. ... Also CSEL does not work with old IDE cables. ...
    (SuSE)
  • Re: Hard Drive
    ... Windows gets its information from the BIOS, ... but the BIOS should have conflicts if they are both set to Master. ... > to Master and the drive on the middle connector is set to slave. ... >>there are little jumpers on the back of the harddrive. ...
    (microsoft.public.windowsxp.hardware)