Can not boot once USB 2.0 external hard drive installed on Windows XP

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Rudy Davis (rudavis_at_cisco.com)
Date: 03/04/04 

Date: Thu, 4 Mar 2004 14:51:03 -0800

Hi all,

I installed an external Western Digital in an external USB
2.0 case to
my Compaq computer yesterday. The hard drive (once
formatted) works
fine once I plug it into the system and I can use it as an
extra drive
which is great.

However if I "REBOOT" the Windows XP machine, it hangs
after memory
test and will not continue to boot. If I unplug or
poweroff the
external USB 2.0 hard drive, booting continues fine.

The guy below had exactly the same problem as me back in
2002 but I
did not see any replies.

Any ideas ?

Thank you,
Rudy
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

From: Anthony Bertorelli (shadowman2001@earthlink.net)
Subject: Maxtor USB hard drive problem
This is the only article in this thread
View: Original Format
Newsgroups: comp.sys.ibm.pc.hardware.storage
Date: 2002-01-11 18:40:11 PST

I recently purchased an external USB hard drive for
backup purposes.
The USB drive is actually USB2, but it is backward
compatable with
the
older standard. I'm not really concerned about speed, as
this is
a
backup drive.

The problem is, if the USB hard drive is connected to the
computer,
the computer will not boot. It will hang at the end of
the memory
test. I have tried several different USB ports, I've
looked
through
various settings in my BIOS, and have even formatted the
drive with
NTFS (I'm using Windows XP).

The hard drive *does* work, I just have to disconnect it
from the
computer whenever I have to reboot. Then when the computer
boots,
reconnect the external drive. Is this normal? I'd like to
leave it
connected to the computer if I can.

I can't find anything on Maxtor's Knowledge Base, and
nothing remotely
coming close on Google's archive. Any insights will be
appreciated.

Thanks.

Relevant Pages

  • Re: Need help with HDD issue on Dell Inspirion 5160
    ... HDD since the system won't recognize it and a good format might be the ... I used the sys.com command to copy the operating files to my USB drive, ... but I wasn't able to successfully boot all the ... BIOS and disabled all bootable drives other than the floppy. ...
    (alt.sys.pc-clone.dell)
  • Re: Need help with HDD issue on Dell Inspirion 5160
    ... HDD since the system won't recognize it and a good format might be the ... I used the sys.com command to copy the operating files to my USB drive, ... but I wasn't able to successfully boot all the ... BIOS and disabled all bootable drives other than the floppy. ...
    (alt.sys.pc-clone.dell)
  • Re: Cannot mount 2.5" drive in USB 2.0 case!!
    ... >>> partition and format it before you can see it in Windows Explorer unless ... >> The only partition is the system partition. ... I can only boot into safe (have tried all ... Hence the usb IDE interface case. ...
    (microsoft.public.windowsxp.hardware)
  • Re: System wont boot w/USB Drive...
    ... if I have a USB Flash Drive plugged in or an External USB hard drive ... I have the latest BIOS installed, the latest on-board RAID bios installed ... Now that I have a 1TB External USB drive I'd like it to ... that's done it accesses the floppy drive looking for a disk to boot. ...
    (microsoft.public.windowsxp.general)
  • Re: System wont boot w/USB Drive...
    ... I have an Asus A7N8xE-Deluxe mainboard and it refuses to start/re-start if I have a USB Flash Drive plugged in or an External USB hard drive plugged in. ... I have the latest BIOS installed, the latest on-board RAID bios installed etc. I've had this system for years and have gotten all the bugs out of it except this one. ... The specific symptom I'm seeing is that during a re-start the computer will go through POST then go through the on-board SATA Bios and then when that's done it accesses the floppy drive looking for a disk to boot. ...
    (microsoft.public.windowsxp.general)