Re: Multifunction (1394 Firewire/USB 2.0) Card Malfunction (Code 10)

From: BigJim (woody10277_at_hotmail.com)
Date: 02/26/04 

Date: Thu, 26 Feb 2004 08:38:53 GMT

try putting the card in a different slot
"Mark" <anonymous@discussions.microsoft.com> wrote in message
news:215c01c3fc3d$86c81510$a101280a@phx.gbl...
> I installed a USB 2.0 & 1394 Firewire Combo PCI Adapter
> in my dell computer running off of Windows XP. I booted
> the computer up and it detected all the new hardware, as
> it should have. Then, I popped in the driver
> installation cd that came with the adapter and that
> worked perfectly. After which, windows told me that my
> hardware was fully configured and ready to be used. Here
> comes the weird part though: I rebooted my system after
> that and it wouldn't start! I tried rebooting it and few
> times to see if it was a fluke, but it wasn't. I also
> tried shutting the computer down to let it cool down, but
> that didn't work either, so I had to pick the
> option "Revert to previous working state" or something
> like that, and when I clicked that, the computer worked
> fine, but then, of course, it detected the pc card again
> and it had to go through the process again, and it still
> doesn't work. When I go into device manager, it gives
> me a code 10 error saying that the device won't start for
> the "OHCI Compliant IEEE 1394 Host Controller" and also
> for the "ALi (name of the software driver for the
> adapter) PCI to USB Open Host Controller." I'm really
> confused as to what's happening, so if anyone could help
> me, I'd really appreciate it. Thank you. Please respond
> to this address: ejay_strobelight@hotmail.com.

Relevant Pages

  • Re: Im a Mac engineer ;-(
    ... card in there was there anywhere in the std control panels that would ... have been showing an 'unknown device' or summat (like Device Manager ... approach with Windows too rather than wade through device mangler). ... time I did that was probably 4 months ago on OSX and this afternoon on ...
    (uk.comp.sys.mac)
  • Re: Cant connect to LAN connection
    ... The XP Device Manager says ... >this may be a driver issue. ... >> It works fine with Windows ME but not with Windows XP. ... >> this card. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Cant Connect
    ... manager says my network card is working correctly. ... Device manager says ... at command prompt I get "Windows IP Configuration", ... I am reinstalling from Vista Beta 2 5384 and it recognized this card ...
    (microsoft.public.windowsxp.general)
  • RE: PCMCIA ATA drive not recognized
    ... "Perry" wrote: ... This does not happen if the card is removed. ... > device manager to stop responding. ... > hangs on the Windows start-up screen (the graphic keeps moving, ...
    (microsoft.public.windowsxp.hardware)
  • PCMCIA ATA drive not recognized
    ... I have a Toshiba MK5002MPL PC card hard drive. ... in other views (e.g. IDE Controllers, PCMCIA adapters) will also cause the ... device manager to stop responding. ... hangs on the Windows start-up screen (the graphic keeps moving, ...
    (microsoft.public.windowsxp.hardware)