Re: Error code:0x000000d1(0x00000000, 0x0000002,0x0000008, 0x0000000)

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Gery,

Thanks for your advice. The error code is 0x000000d1 (0x00000000, 0x0000002,
0x0000008, 0x00000000). It happens for both normal mode and safe mode until
the log in screen it will prompt the error code.

The memory were slot in 4x1gb (Desktop), 2x2GB (Lappy). Both has been tested
running on MEMTEST32 but no error found on the RAM. Even I'm using the pair
of rams and single ram also to no avail. The rams was purchased from the same
local vendor where I purchased both my lappy and desktop.

The lappy drivers I found in the HP forums where they claimed that it can be
used on this lappy.


"Gerry" wrote:

Asuran

Please recheck the Bug Check code in the Stop Error code. It contains at
least one extra character and has me wondering whether there are further
errors. This makes searching prone to error. Your report is extremely
rare.

How frequently is the error occuring? Does it occur in Safe Mode? Does
it occur during the boot process, after the boot has completed or both
during and after?

How many memory sticks are installed? Are they all as originally
supplied when you purchased the computer new?

Your laptop was intended for use with Vista. How and where did you
obtain Windows XP drivers?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


Asuran wrote:
Hi, recently both of my pc and lappy make a problems and it shows the
above code. I would like to know what is the problem causing it? So
far what I've done was:

PC - Intel Dual Core 2160, Foxconn Mars, 4 GB RAM, Nvidia 8800GT, Win
XP Pro. Lappy - Compaq CQ40 125AX, 4 GB RAM, ATi 3200, Win XP Pro.

1) Use system restore to the previous setup. (Fail)
2) Run scan disk and disk defragment ( Fail)
3) Remove RAM and run diagnostic for MEMTEST (Fail)
4) Remove both GPU driver and update the latest driver. (Fail)

Is there any other method that I can do? Thank you.


.

Relevant Pages

  • Re: error code 0x80090019, cant restore or start in safe mode
    ... I finially got it to the screen where you can select safe mode but i cant ... Should I purchase a standard keyboard and try that? ... the error code says " a problem is preventing windows from accurately ... to the restore screen if I have the CD in. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Cant load .dll
    ... I get error code 1607. ... you start in safe mode. ... >>I don't know wich dll is missing, heres what happens- We log on and ... >> windows xp home edition and have high speed cable internet. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: 0x800700c1 help!!
    ... 0x80070002" error message cites license-checking issue after upgrade on Dell computer" ... The similar though not exact error code amounts to the same thing. ... "Leonard Grey" wrote: ... message 0x800700c1 I can get into safe mode ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Windows XP- How to get into Safe Mode?
    ... You need to post the *exact* err msg, together with the Stop error code that ... let it sit for 10 seconds the computer would restart as well.. ... the computer just restarts again and brings me back to safe mode. ... and no one gave me advice that worked. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: OpenSSL 1.0.0d for Freebsd HEAD
    ... ar cq libcrypto_p.a `lorder ...` ... ranlib libcrypto_p.a ... *** Error code 1 ... Reverting back to binutils-2.15 makes build fail with another error. ...
    (freebsd-current)