Re: Cloning

OK I had the good luck to find the cloning utility on the Acronis software.
Sure enough it did the job. Now I am having a problem getting the previously
slave IDE to be recognized as right now I had it in slave mode on the jumper
settings.
So now I have to fiddle with the settings unless someone knows better how to
get the IDE to be recognized?
OUF!

"AIANDAS" wrote:

OK thank you very much..........

"Mark Adams" wrote:



"AIANDAS" wrote:

OK some of the items I'll have to look up.
In my case my SATA HDD is by Seagate, so they'll have something on their
website which will allow me to migrate my OS etc?
The drive itself was OEM so I did not get a CD or whatever. Thank you.

"Pegasus (MVP)" wrote:


"AIANDAS" <AIANDAS@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:27407B1A-2164-411A-AAF2-46AF3999980D@xxxxxxxxxxxxxxxx
I had one question re dynamic vs. basic which has been answered.
Now I have the following dilemma:
I have a 40 gig disk where my XP Pro is lying
I want to clone it onto a 500 gig SATA
Norton Ghost 2003 is not really working as I had hoped, does XP Pro allow
me
to migrate/clone onto my 500 gig.
Any suggestions will be greatly appreciated.
Thank you.

Cloning utilities belong to the class of tools that usually do not work with
dynamic disks . . .

Windows does not have any inbuilt tools for cloning. Here are a few options:
a) Use the cloning tool that the manufacturer of the new disk makes
available on his home site.
b) Connect both the old disk and the new disk to some other PC, then use
robocopy.exe to perform the cloning.
c) Boot the machine with a Bart PE boot CD (which you have to manufacture),
then continue as per option b).

Some extra notes for options b) and c):
- You must partition and format the target disk before commencing the copy
process.
- You must mark the first partition as "active".
- You must use the appropriate switches with robocopy.exe so that it copies
hidden and system files.
- When booting the machine for the first time with the new disk, make sure
that the old disk remains disconnected.



Seagate now has a cloning tool from Acronis. Go to the Seagate website, find
the cloning and formating software for your model hard drive. Download the
tools and create a bootable CD from the download. Put the bootable CD in the
CD drive and shut down the computer. Open the case and attach the new hard
drive to the IDE cable. Set jumper to "slave". If SATA, attach to an
available port. Boot the computer off the CD and use the clone tool to clone
to the new drive. When done, shut down the computer and disconnect and remove
the original hard drive. Set the new drive jumper to "master" for IDE or
connect to the original SATA port. Boot the computer and you should be good
to go. Works every time.
.

Relevant Pages

  • Re: Cloning my C Drive onto D...
    ... I've cloned my C drive onto D twice, both with equal success (or ... and boot up from IDE2 goes ahead as normal. ... Depending on how you did it, your cloning may ... > a) By using a commercial disk imaging program such as the one ...
    (microsoft.public.win2000.general)
  • Re: How do I copy my entire hard drive to an external drive?
    ... recommendations has been to consider a disk imaging program such as ... I use the Ghost 2003 program to accomplish all this. ... cloning operation either from Ghost's Windows interface or through DOS-like ... With the USB external hard drive connected, boot up with the Ghost floppy ...
    (microsoft.public.windowsxp.general)
  • Re: cloning system hard drive
    ... disk imaging program for the purpose you've indicated. ... solely interested in a one-time cloning of the contents of your old HD to ... utilities are not really suitable for routine disk imaging purposes ... For a good many years I've worked with the Symantec Norton Ghost program. ...
    (microsoft.public.windowsxp.general)
  • Re: Cloning
    ... I have a 40 gig disk where my XP Pro is lying ... I want to clone it onto a 500 gig SATA ... Windows does not have any inbuilt tools for cloning. ... Boot the machine with a Bart PE boot CD, ...
    (microsoft.public.windowsxp.general)
  • Re: Cloning
    ... I have a 40 gig disk where my XP Pro is lying ... I want to clone it onto a 500 gig SATA ... Windows does not have any inbuilt tools for cloning. ... Boot the machine with a Bart PE boot CD, ...
    (microsoft.public.windowsxp.general)
Loading