Re: blue screen error - Symbols can not be loaded...

i found this in the latest dump file. Mean anything?

MODULE_NAME: mfehidk

FAULTING_MODULE: 804d7000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 485162bc

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx"
referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
nt+74950
8054b950 ab stos dword ptr es:[edi]

TRAP_FRAME: 9bb66bbc -- (.trap 0xffffffff9bb66bbc)
ErrCode = 00000002
eax=0000001c ebx=00000000 ecx=00000000 edx=e46615c8 esi=e46615d0 edi=00000000
eip=8054b950 esp=9bb66c30 ebp=9bb66c88 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt+0x74950:
8054b950 ab stos dword ptr es:[edi]
es:0023:00000000=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WRONG_SYMBOLS

BUGCHECK_STR: 0x8E

LAST_CONTROL_TRANSFER: from 9b578cc2 to 8054b950


also see this:

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

"Gerry" wrote:

jgb555

These types of error can always be down to bad memory. Download and run
the test.

Do you have one or two memory modules? Page 58 of the User's Guide deals
with memory.

If you have bad memory you may have a warranty claim.

BTW this is not the same error as the earlier one but this is not
unusual.

Background information on Stop Error message 0x8E
http://msdn2.microsoft.com/en-us/library/ms794023.aspx

0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
A kernel mode program generated an exception which the error handler
didn't catch. These are nearly always hardware compatibility issues
(which sometimes means a driver issue or a need for a BIOS upgrade).
Source: http://aumha.org/a/stop.htm


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~



jgb555 wrote:
Geez, so much for the waiting and hoping it wouldnt happen again. It
just did. I had disabled tha automatic restart and got this error
code on the blue screen prior to shut down:

STOP: 0x0000008E (0xC0000005, 0x8054B950, 0x9BB66BBC, 0x00000000)

I got this as the error code after restart and this link which says
its a RAM issue?

BCCode : 1000008e BCP1 : C0000005 BCP2 : 8054B950 BCP3 :
9BB66BBC BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0
Product : 256_1

http://wer.microsoft.com/responses/Response.aspx/603/en-us/5.1.2600.0.00000000.9.9?SGD=1f119acc-6879-43ce-a15f-f3c4d31c2b33


"Gerry" wrote:

jgb555

Does the Stop Error occur during or after the computer boots?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

jgb555 wrote:
i think the second event log is what you are looking for right?

"PA Bear [MS MVP]" wrote:

See Gerry's reply.

jgb555 wrote:
not sure. i did a find for "stop" and didnt see anything. is
there another
way to look?

"PA Bear [MS MVP]" wrote:

Got a STOP error w/parameters?

jgb555 wrote:
I have been getting blue screen errors about once every 3 weeks.
I was hoping it would magically stop but it hasnt. Before I
ship my notebook to
the manufacturer who was beyond useless, I did a little research
and was able to download the debugging tools and open the .dmp
files. They all say
the same type of stuff which is:
Symbols can not be loaded because symbol path is not
initialized. The Symbol Path can be set by:
using the _NT_SYMBOL_PATH environment variable.
using the -y <symbol_path> argument when starting the debugger.
using .sympath and .sympath+

There's a whole bunch of stuff about symbols like the above and
here is another:
Your debugger is not using the correct symbols


So is this what is causing my blue screen issues or is this
saying i cant
use the debugger to tell me what is causing the issues?



.

Relevant Pages

  • Re: blue screen error - Symbols can not be loaded...
    ... These types of error can always be down to bad memory. ... and was able to download the debugging tools and open the .dmp ... Your debugger is not using the correct symbols ... So is this what is causing my blue screen issues or is this ...
    (microsoft.public.windowsxp.general)
  • Re: MyString Class
    ... > I compiled your program and run it under the debugger. ... > The first crash happens in ... ... > memory is flawed. ... First bug fixed. ...
    (comp.lang.cpp)
  • RE: Memory increasing even when in debug-break
    ... there are 2 types of memory leak in .Net: ... More interesting is the debugger breaks while memory still increasing ... Microsoft Online Community Support ...
    (microsoft.public.vsnet.debugging)
  • Re: Server 2003 SP2 0x00000050 BSOD
    ... Copyright Microsoft Corporation. ... Page 11a4e1 not present in the dump file. ... Invalid system memory was referenced. ... I remember seeing a hotfix to address it. ...
    (microsoft.public.windows.server.general)
  • Bsod irql_not_less_or_equal
    ... Kernel Summary Dump File: Only kernel address space is available ... *** Memory manager detected 2 instanceof page corruption, target is likely to have memory corruption. ... The exception code that was not handled ...
    (microsoft.public.windows.vista.performance_maintenance)