Re: Reinstall XP Home from Hardrive




"Pegasus (MVP)" <I.can@xxxxxxxxxx> wrote in message
news:eXXyb7fMJHA.4536@xxxxxxxxxxxxxxxxxxxxxxx

"xpusrca" <xpusrca@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:23D0199B-8414-4BBF-8516-1BDF9ED5F6F8@xxxxxxxxxxxxxxxx
The CDROM in my notebook has died and I desperately want to reinstall my
XP
Home installation. Luckily, I had copied the installation CDs that came
with
my notebook on the hard drive some time ago.

What I would like to know if it's possible, and safe, to reinstall
Windows
from the Hard drive using the copied files from the CD?

In spite of your foresight you're in a bit of a bind. Here is why:
- If you run the installation program F:\i386\winnt.exe then you're told
that that the program won't run on a 32-bit version of Windows.
- If you run F:\i386\winnt32.exe then you're probably told that the
current version of Windows is more recent than the one you trying to
install (presumambly because of your current Service Pack).

If Patrick Kennan's suggestion does not work (perhaps because your BIOS
does not allow you to boot from a USB device) then you could try this
alternative method. This is a lengthy process that requires some patience.
As an option you could return your laptop to the nearest service point and
have Windows reloaded, probably for a fee.
1. Remove the hard disk from your laptop.
2. Install it in a 2.5" USB case.
3. Connect it to some other PC.
4. Back up all your files, including your EMail files.
5. Test your backups, especially your EMail files.
6. Use diskmgmt.msc to delete all existing partitions from
the laptop disk. This will destroy all data!
7. Create a primary FAT32 partition of 20..32 GBytes. 32 GBytes is the
maximum.
8. Mark this partition as "active" and set its label to "Laptop-C".
9. Format this partition.
10. Boot this machine with a Win98 boot disk or CD (www.bootdisk.com).
11. Find out which drive letter points to the label "Laptop-C". Let's
assume it's D:.
12. Type these commands:
sys D:{Enter}
copy a:\dos\smartdrv.exe c:\{Enter}
13. Reboot back into Windows.
14. Copy your WinXP CD to the USB drive.
15. Copy your drivers CD to the USB drive.
16. Re-install the disk in your laptop.
17. Reboot it. It should boot into DOS.
18. Type these commands:
c:\smartdrv.exe{Enter}
c:\i386\winnt{Enter}
19. Install Windows by following the prompts.
20. When finished, open a Command Prompt and type this command:
convert c: /fs:ntfs
21. Partition & format the rest of your disk. You will now have a system
drive (C:) and a data drive (D:).

To avoid such problems in future I recommend that you look at an imaging
program such as Acronis TrueImage. If you had an image then you could
restore it on any other machine within a very short time.

The last paragraph is the solution that I used. I use ATI. I set it to
make a backup of the system drive to a folder on a spare USB drive every
week.
Once per month, I move the USB drive to my desktop where I copy the current
backup file to double layer DVD disks using Easy CD Creator.

So, when the system drive on the laptop needed to be replaced, I first
bought another notebook drive and USB enclosure.
I found the latest monthly backup for the notebook, and downloaded the
backup file on the double layer disks to a folder on the desktop. This
operation took about 30 minutes.
I then placed the new laptop drive in my spare USB enclosure and connected
it to an available USB port on the desktop.
Now, I used ATI to recover the latest backup. This operation took about 15
minutes.
I then placed the new laptop drive in the laptop, an booted the laptop. As
you can see, in less than an hour the laptop was back up in full working
order.
The ATI backup copies all partitions to the backup file. The restore
operation replaces all partitions, and you need not do anything to the
restored contents.

As you can see, my method is based on having two computers at hand. If you
do not, then ATI can create a restore disk, and it will create a backup set
of disks. I have never tried this method and cannot vouch for how quickly
it works.
Jim


.



Relevant Pages

  • Re: Corrupt Operating System....need help!
    ... it is how backup disk was made. ... yes there other DLL files corrupt as i am told that DLL files need to be ... have original installation disk, as it never arrived with computer ...
    (microsoft.public.windows.mediacenter)
  • Re: Im back
    ... said that implied he thought I could not rely on my Dell laptop and he ... any disk on any computer in any environment can fail at any ... before failure, giving you a chance to rescue data before it dies). ... so daily or every-N-days backup has to suffice. ...
    (uk.media.radio.archers)
  • Re: Backup requirement
    ... Old laptop, for personal use, running Debian Etch. ... month to DVD via my external DVD writer, and to leave copies with friends. ... planning to backup your 80G of data once per month. ... I'd stick with backing up to disk. ...
    (Debian-User)
  • Re: Windows unable to boot - black screen
    ... must then be coming from the Windows CD supplied by Dell (which I'm using to ... daughter laptop), but none recently. ... no software installation is needed. ... You can if it is a 2.5" disk but not if it is a 3.5" disk. ...
    (microsoft.public.windowsxp.general)
  • Re: Odd problem following disk replacement
    ... backup disk on the network, and then created a backup of the C: and D: drives using ntbackup. ... install I was trying to activate),modified the boot.ini file to point to the installation on the D: drive and all should have been good. ...
    (microsoft.public.win2000.setup)

Quantcast