Re: Remote Desktop connection

Tech-Archive recommends: Fix windows errors by optimizing your registry


"Jason" <JAllen@xxxxxxxxxxx> wrote in message
news:OIn6sXRIJHA.2772@xxxxxxxxxxxxxxxxxxxxxxx
I see RDC uses UDP and port 3389. Initially I thought I just needed to
forward TCP port 3389 from the router to the computer. So do I need to
forward UDP port 3389 as well? Is there other ports that need to be
forwarded as well? I've used RDC over a LAN ok but haven't been able to
over the internet where the host computer is conencted via an ethernet
router.

Thanks,
J.

TCP Port 3389 is sufficient and no other ports are required. Start by
running some tests with this command:
telnet IPAddress 3389
first on your LAN, then via the Internet. Note that you must use your
router's external IP address for these tests, not the PC's internal address.


.

Relevant Pages

  • Re: Using Remote Desktop From an SBS Domain
    ... when you tried to RDP while attached directly to a port on your router? ... Internet to initiate an IP conversation with your computer. ... This situation is different than if you ran your own NAT connection sharing ...
    (microsoft.public.windows.server.sbs)
  • Re: Publish Web Server behind SBS 2003 Standard
    ... I ended up plugging another router into the WAN. ... How to configure Internet access in Windows Small BusinessServer2003http://support.microsoft.com/kb/825763/en-us ... network interface on right (By default the interface name should be ... input 80 in Outgoing port box. ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW failure
    ... The port forward thing I had tried just out of desperation. ... The router is 192.168.1.1 subnet 255.255.255.0 ... > port 80 from the Internet to your Server. ... >> SBS box has the 2 NICs. ...
    (microsoft.public.windows.server.sbs)
  • Re: how do you setup a wireless connection without using DNS in the NIC?
    ... I CURRENTLY HAVE NODES CONNECTED TO A SWITHC - NETOPIA ROUTER CONNECTED TO ... THE SWITCH AND FROM THE WAN PORT ADTRAN T1 ROUTER. ... PUBLIC CHANGE THEIR NIC TO RECOGONIZE THE DNS IP. ... building) and have them access the Internet via their lap top. ...
    (microsoft.public.windows.server.setup)
  • Re: =?iso-8859-1?Q?ports_=F6ffnen?=
    ... solltest du hinter einem DSL Router ... Dann musst du nämlich den betroffenen Port vom Router auf deinen PC ... Internet aus erreichbar wird, ist er auch direkt angreifbar aber das nur so ... Next by Date: ...
    (microsoft.public.de.german.windowsxp.sonstiges)