Re: No Windows sounds but do have WMP sounds

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



Thank you, Rey. The Gateway does not have MB integrated sound so I
could not turn it off. Flipping the digital/audio box didn't help
either as that only applied to the CD/DVD drives which was working.
You did, however, lead me to look through the sound item in Device
Manager. When I looked at the Media Control Devices properties I
discovered that the (MCI) Midi Sequencer had been configured to use
the phone modem instead of the sound card. Once I switched it to use
the sound card, everything started working correctly. Thank you again
for pointing me in the right direction.

Brian

"Rey Santos" <ReySantos@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:969ADC87-42E5-4DD8-8D4A-704972EBF8D2@xxxxxxxxxxxxxxxx
Chances are either you have on board audio or you have sound blaster
live
audio card like my old Gateway PC. You have to disable your onboard
sound in
the BIOS to use Soundblaster. If you have soundblaster its also
possible
that when you reinstalled it changed the digital output signal. Go
to
advanced properties and try to check or uncheck the digital output
box and
see if you get sound.


--
Rey


"Another Brian" wrote:

I'm so confused. I've just finished rebuilding an old Gateway PC.
This
morning I had Windows sounds (the logon ta-da and other beeps and
boops) but audio CD's wouldn't make any sound. Playing wav files
through WMP did not do anything. I then updated the audio drivers
downloaded from Gateway for this PC. Now I can play any media
through
WMP, but the Windows sounds do not work. When I go into Control
Panel
| Sound and Audio Devices Properties, Volume tab, it says "No Audio
Device". When I go to the Sounds tab and try playing any of the
sounds
such as Asterisk, I get the error message:

Windows cannot play the sound %SystemRoot%\media\Windows XP
Error.wav

When I go into Device Manager, there was a question mark next to
Microsoft WINMM WDM Audio Compatibility Driver. I couldn't find
anything about it on the Gateway driver list. Searching Google came
up
a suggestion to delete this driver and reboot. If it wasn't
automatically found, then to scan for hardware changes. It wasn't
found.

Any suggestions on how to get Windows to beep at me.

Brian





.



Relevant Pages

  • Re: No Sound from Dimension 5100
    ... If you still have the W98 CD that came with your Gateway, or know some one that has the CD, you should be able to copy them into a folder that you create. ... Then you can copy and paste to the Windows default media folder located at: ... > bucks, hooked it up and as Pen predicted, there was sound. ...
    (alt.sys.pc-clone.dell)
  • Re: Laptop No Sound
    ... MX6025 Specs ... Well if you still have the Gateway Recovery DVD, ... I don't know if you still have the Recovery partition or not. ... to try to get sound working. ...
    (comp.sys.laptops)
  • Want Surround Sound decoding
    ... I just got a Gateway FMC-901x MCE PC with a Soundblaster Audigy2 card. ... Although I have MCE set up to watch & record from CableTV I would ... like to process the Dolby Digital sound I get from my Dish Network ... model 6000 HDTV Satellite receiver which has an optical out port. ...
    (microsoft.public.windows.mediacenter)
  • Re: Need Help - Laptop No Sound Playback Device
    ... I did download & install the chipset driver from Gateway for this ... The driver for the Multimedia Audio Controller is not there!! ... Gateway 7422GX laptop. ... Everything is working fine except no sound - no sound playback device ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Great video but wheres the audio
    ... Gateway purchased from Best Buy and using a Sony 8M camera. ... Where would I find the settings that you mention? ... > BestBuy made it sound like it would be a "breeze." ... >> volume control record settings and in the app you use to capture with. ...
    (microsoft.public.windowsxp.moviemaker)