Re: Error sync-ing internet time

Doug, Followed your instrux, all went well through the line w32tmregister,
got a response that it registered. next line, though came back error- too
many command-line parameters, so I tried a new line at NtpServer.... and it
errored -- too few command-line parameters.
Further suggestions??

Thanks

"Doug Knox - [MS-MVP]" wrote:

Near the bottom of the list in Services, you should see Windows Time. If
not, then the service is missing/damaged.

To verify whether or not its present, click Start, Run and enter CMD and
press Enter. Once the Command Prompt window opens up type NET START
W32TIME This will start the Windows Time service, if its not damaged.

If you get an error or the command fails, reset the Windows Time Service by
entering the following commands, one at a time, in a Command Prompt window.

net stop w32time
w32tm /unregister [ignore error message]
w32tm /unregister [enter a second time]
w32tm /register
reg add hklm\system\currentcontrolset\services\w32time\parameters\ /v
NtpServer /t reg_sz /d time.nist.gov /f
net start w32time

The above is from:
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1459955&SiteID=17
--
Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart
Display\Security
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Per user Group Policy Restrictions for XP Home and XP Pro
http://www.dougknox.com/xp/utils/xp_securityconsole.htm
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.


--
Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart
Display\Security
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Per user Group Policy Restrictions for XP Home and XP Pro
http://www.dougknox.com/xp/utils/xp_securityconsole.htm
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.

"Bart" <Bart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:804607AF-3EA1-4956-9205-314DC6A50EC6@xxxxxxxxxxxxxxxx
Doug, Thanks, but my Windows XP doesn't seem to have a listing undeer
Services .MSC for Windows Time Service. I did find an item involving
Remote
Procedure Call (RPC) which was cited in my error message, and made it
automatic and started. No luck though. Never got to the point where I
could
check on Port 123
I notice that I have no information on the date and time of the last
time
sync. Seems like the error message is hinting that it has nothing to
compare
current time with.
The thread you provided had no solution for me, I'm afraid.

Thanks,
Bart

"Doug Knox - [MS-MVP]" wrote:

Click Start, Run and enter SERVICES.MSC Ensure the Windows Time Service
is
Started and set to Automatic. Also, if you're using a 3rd party
firewall,
or even Windows Firewall, ensure that port 123 is opened. This is the
port
that's use for network time synchronization. If you're firewall supports
it, you can set the IP address of the time server as a trusted site.

See the following thread for more information.

http://www.edbott.com/weblog/?p=1779

--
Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart
Display\Security
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Per user Group Policy Restrictions for XP Home and XP Pro
http://www.dougknox.com/xp/utils/xp_securityconsole.htm
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.

"Bart" <Bart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9D5617ED-9D52-404F-895E-37F998EDA786@xxxxxxxxxxxxxxxx
I have been getting an error message when trying to synchronize my
computer
time with time.nist.gov on my laptop. Message is:
"An error occurred getting the status of the last synchoronization.
The
RPC server is unavailable."
I have been connected to the internet when attempting to sync.
Same message with all of the server choices in Control Panel >
Date&Time>Internet Time.
No problem with sync-ing on my desktop minutes after trying and
failing
on the laptop. Both are running Norton, so I don't think it's a
firewall
problem.
Any help would be appreciated.

Thanks in advance


.

Relevant Pages

  • Re: Error 0x8007000B
    ... This problem started when I did a reinstall of Windows XP SP2 and then ... At the Command Prompt, type in the following commands pressing Enter ... Error message when you use the Windows Update or Microsoft Update Web ...
    (microsoft.public.windowsupdate)
  • Re: 0x80070424 Error
    ... When you ran the WUAUENG.DLL command, did you include regsvr32 as part of ... delete the wuauserv key in the registry, but to delete the DeleteFlag value ... Automatic Updates feature or the Windows Update Web site." ... >>> still got the same error message when trying to install the latest ...
    (microsoft.public.windowsupdate)
  • RE: BSOD IRQL_NOT_LESS_OR_EQUAL
    ... Troubleshooting a Stop 0x0000000A error in Windows XP ... Open a run command and type in these commands to see if there is a conflict ... later for this step to copy the error message on it. ... eventvwr.msc click you will get the Event viewer control Panel. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Removing XP
    ... Manually remove if you cannot start Windows XP ... If you receive an error message in response to the second command, ... If you locate the Undo folder on a different drive, ...
    (microsoft.public.windowsxp.newusers)
  • Re: Error sync-ing internet time
    ... Doug, Success. ... W32TIME This will start the Windows Time service, ... Procedure Call which was cited in my error message, ...
    (microsoft.public.windowsxp.general)