Re: Trouble with mu USB connection

Thank you, Nepatsfan, this will give me something to play with. Have a great
day.

On a lighter vein, your moniker nepatsfan, somehow reminds me of the
Egyptian pharaoh Hatsheput (rhymes with chickensoup). 3,500 years ago, she
built a magnificent temple/memorial that would have been the envy of the
Ancient Greeks. Still standing, in all its glory.

http://en.wikipedia.org/wiki/Hatshepsut
--
Walter
www.rationality.net
-
"Nepatsfan" <nepatsfan@xxxxxxxxxxx> wrote in message
news:%23iAIoOGxIHA.1436@xxxxxxxxxxxxxxxxxxxxxxx
It's been my experience that when you install the software that came with
your camera it takes over for the Scanner and Camera Wizard. I'm not sure
if the following instructions will help, but they might be worth a try.

Go to Control Panel and double click on Scanners and Cameras.
Right click on the icon representing your camera and select Properties
from the menu.
In the camera's Properties ***, click on the Events tab.
Check if your ACDsee is available in the box next to Start this program.
If it is, see if you can associate it with the events listed next to
Select an event.

If that doesn't help, you might want to post a new question on this topic
to this newsgroup.

Good luck

Nepatsfan

"Walter R." <wer25@xxxxxxxxxxx> wrote in message
news:%23fag46ExIHA.5996@xxxxxxxxxxxxxxxxxxxxxxx
Hi Nepatsfan

Yes, your suggestion did work just fine. Thank you very much. You really
know Windows XP inside out. I only got as far as the Device Manager.

Another, related question, if you do not mind.:

When I transfer images from the camera to my computer, the Scanner &
Camera Wizard pops up. I prefer to use my own Image processing program
for transferring files from the camera. So, I have to flick off the
wizard and then bring up my own imaging software.

Is there a way so that my ACDsee imaging program opens up the transfer,
instead of the Windows Wizard? Would be nice.

Thanks again.


--
Walter
www.rationality.net
-
"Nepatsfan" <nepatsfan@xxxxxxxxxxx> wrote in message
news:ONveQuExIHA.1240@xxxxxxxxxxxxxxxxxxxxxxx
"Walter R." <wer25@xxxxxxxxxxx> wrote in message
news:e4NJEiExIHA.5288@xxxxxxxxxxxxxxxxxxxxxxx
My old digital camera was USB I compliant. No problem with windows XP
SP2.

My new camera is a fast USB II model. When I connect it to my computer,
a box pops up saying: There is a high-speed device attached to a non
high-speed port. It then tells me that my computer has no high-speed
USB port.

There is no provision for stopping this pop-up, only an option to
"close" the box. This Win XP box pops up every time I transfer images
from my camera to my computer.

Is there any way to stop this pop-up box? Could this possibly be hidden
somewhere in the "services" section?

--
Walter
www.rationality.net
-


See if this helps.

Go to Control Panel and double click the System icon.
Click on the Hardware tab.
On the Hardware page, click on the Device Manager button.
In Device Manager, click on the + sign next to "Universal Serial Bus
controllers".
Right click any of the entries that ends with "Host Controller".
Select Properties from the menu.
In the Properties ***, click on the Advanced tab.
In the Advanced page, put a check mark in the box next to "Don't tell me
about USB errors".
Click OK.
Close Device Manager.
Close the System applet.

On a side note, when you're in Device Manager, check to see if any of
the entries under Universal Serial Bus controllers are for Enhanced Host
Controller. If there are none, you're computer only supports USB 1.1. If
you want to take advantage of the speed aspect of a USB 2.0 device you
could install a USB 2.0 card in an available PCI slot on your computer.

Good luck

Nepatsfan










.

Loading