Re: Boot Problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I don't know what happened with my last reply but it wasn't compressed like that when
I sent it.
It should have read like this:

Google is your friend:

http://tinyurl.com/6xf9gz



According to this:

http://forums.techguy.org/windows-nt-2000-xp/471866-c-system-volume-information-2.html

this is a file that you should not remove;
<You can safely delete anything EXCEPT the "MountPointManagerRemoteDatabase" file
andthe "tracking.log" file.>

Also take a look here:
http://blogs.msdn.com/oldnewthing/archive/2003/11/20/55764.aspx

for more on restorepoints & how to remove them(other than the ways that I previously
told you).

Take a look on down the page on the Google search.

You're not alone.

~Gary





"Marty" <Marty@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:317BA80C-3302-4960-B76A-9D55A5789330@xxxxxxxxxxxxxxxx
Gary: I was able to delete the file in Safe Mode but it returned with the
same effects after regular re-boot. Looks like it's a file put there by the
system. Thanks for your advice. Any other suggestions?

"Gary Brandenburg" wrote:

The System Volume folder is what contains your restore points.
You can either run Disk Cleanup,then click on the "More Options" tab & remove
all,but
the most recent, restore point or disable System Restore,altogether, which will
remove all restore points.
Otherwise-have you tried to remove the entry while in Safe Mode?

~Gary

"Marty" <Marty@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:00980742-B94A-41BF-921B-9B930B9428E3@xxxxxxxxxxxxxxxx
Gary: Thanks for the info. Perhaps I'll give Acronis a try. But, there's
another problem I've encountered, namely, the file "tracking.log" in System
Volume Information folder. It won't allow a Spyware or virus scan. Hangs them
up so they can't even be canceled. Even just clicking on it, either to open
it or check its properties, completely hangs up the computer requiring a
manual shutdown and restart. I tried deleting it from C:>. Was able to change
the attributes OK, but it wouldn't delete. So I wonder what will happen when
Acronis reaches that point in the cloning. I guess I can try and see. In the
meantime, do you or anyone else who reads this know a way to get that file
deleted?

"Gary Brandenburg" wrote:

Marty-
I just recently used the Data Lifeguard Tools on my parents PC to transfer
their
HDD
to a bigger 1 & some of the things didn't make the transfer too well(even
though
it
claimed that everything did,except the restore points & the hibernation files).
After having to reinstall certain programs & editing the boot files,I finally
got
it
to what I thought was a good running condition & left it with them.
Well,since I didn't know what other problems might surface while I wasn't
there,&
not
wanting to take any chances,the next day I downloaded the trial version of
Acronis
11
their machine & used the disk cloning operation & when it rebooted, this
time,there
were no problems with anything .
I had Acronis Home 10 on my machine & I can vouch that it's a great backup
program(&
highly recommended here),but never used it for anything else till then. I ended
up
buying Acronis 11 for my own machine & installing my copy of Acronis 10 on
theirs.
Give it a try-I think that you'll have better success with Acronis True Image
over
the Data Lifeguard Tools.

~Gary



"Marty" <Marty@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4636D2A5-0DCA-4A0F-BD1B-2D22ED13FA93@xxxxxxxxxxxxxxxx
Yes, I tried Safe Mode. Same results.

Need to say this is an HDD that I cloned using WD's "Data Lifeguard Tools",
which reported no problem in the process.

"Ron Badour" wrote:

Did you try to boot in safe mode or from the last known good configuration?
If not, try tapping the F8 key when the boot sequence begins.

--
Regards

Ron Badour
MS MVP 1997 - 2008


"Marty" <Marty@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7B589D53-DD2E-4597-B7C4-A6B67472D1D6@xxxxxxxxxxxxxxxx
OS=XP-Sp2. Boot proceeds no farther than the screen where "Windows is
starting up" usually appears. That screen appears, but that statement
doesn't. The HDD appears to be trying to do something, but nothing
happens.
Suggestions and\or directions will be appreciated.











.

Relevant Pages

  • Re: Boot Problem
    ... The AVG blog is specific to me since I use AVG Free 7.5 ... remove all restore points. ... Acronis reaches that point in the cloning. ... I just recently used the Data Lifeguard Tools on my parents PC to transfer ...
    (microsoft.public.windowsxp.general)
  • Re: Avast! Anti-virus false alarm
    ... restore from back-up - restore points don't work! ... After the earlier discussions on Acronis I thought that I would try the ... reloaded it and several more Blue Screens ... I did Google at the time and Acronis and BSOD covered many pages. ...
    (uk.people.silversurfers)
  • Re: ntbackup restore issue
    ... Say you have you backup drive and you noticed your backup drive is ... Acronis True Image wasn't designed to use a new backup drive, ... Acronis TrueImage will restore an image back to any disk, ... you back up drives with a missing MBR? ...
    (microsoft.public.windowsxp.general)
  • Re: Recognizing an external drive when rebooting
    ... if you're just trying to restore a previously ... You just *boot up on the Acronis CD*, ... that should restore from one of my external drives to my C drive. ... Acronis screen and simply going through the screens to create the ...
    (microsoft.public.windowsxp.general)
  • Re: Recognizing an external drive when rebooting
    ... if you're just trying to restore a previously ... You just *boot up on the Acronis CD*, ... that should restore from one of my external drives to my C drive. ... Acronis screen and simply going through the screens to create the ...
    (microsoft.public.windowsxp.general)