Re: Windows won't boot if any partition extends past 120 GB on 250 GB drive


"Will Pittenger" <no-spam@xxxxxxxxxx> wrote in message
news:%23ta$3hxhIHA.200@xxxxxxxxxxxxxxxxxxxxxxx
I already knew 48-LBA was supported thanks to another program I downloaded.
However, I did download yours. It was nicer. It does say that 48-bit LBA
is supported.

I should note that the drive in question has been chirping. When my
previous drive did that, someone at http://hddguru.com said to return the
drive. I did that. So far, I have only noticed it with this drive (the
replacement) once with Windows failing to wake up from hibernation once
(cause unknown as I was asleep).

However, neither of the programs that I have run to check things like that
have had a problem. Please note that your program sees this drive as only
137 GB. It knows about 48-bit LBA drives but can't properly recognize
one?

JS wrote:
Verify if HD Tune indicates your drive supports 48Bit LBA.
HD Tune, provides drive info and has an option to test your drive.
http://www.hdtune.com/
--
will 68 at mtco dot com
will dot pittenger1 at gmail dot com (use this address for large
signatures)


Will:
It seems reasonably clear (I least I *think* it's "reasonably clear"!) that
when you installed your large-capacity HDD your XP OS did *not* contain SP1
and/or SP2. Would I be correct about that?

Should that be the case the OS will *not* detect disk-capacity > 137 GB
(roughly 128 GB binary). Should you subsequently install SP1 and/or SP2 the
full capacity of the disk will be recognized however the remaining disk
space > the 137 GB (128 GB) will be considered "unallocated space", i.e.,
disk space that you can partition/format using XP's Disk Management utility.
So at the minimum you have two partitions on the drive.

Obviously we're assuming your BIOS supports large-capacity disks and judging
from your description it does.
Anna

P.S.
The "chirping" is another story. Just ensure you maintain current backups of
your system.


.

Relevant Pages

  • Re: 3B2 Disks
    ... being able to read the disk in its present format. ... 2 MFM drives on a custom controller. ... SCSI came much later as an add on card. ...
    (comp.sys.3b1)
  • Re: OT-True Image Backup
    ... Make sure the USB drives file system is NTFS and not FAT32.. ... Jaymon is correct in that the disk image you create and save to the D: ... partition of your USB external HDD will have no effect on the other ... Step-by-Step Instructions for Using the Acronis True Image Program to Backup ...
    (microsoft.public.windowsxp.help_and_support)
  • RE: Stop 0x7B after upgrading BIOS on Intel SE7520BD2 server...
    ... disk or disk controller, an incompatible device driver, disk cabling ... However, there are potential problems with LBA, such as: ... The server is cconfigured with two SATA drives running off the system board ... SATA ports) for the boot drive It also has an Intel SRCS16 RAID ...
    (microsoft.public.windows.server.general)
  • RE: Stop 0x7B after upgrading BIOS on Intel SE7520BD2 server...
    ... disk or disk controller, an incompatible device driver, disk cabling ... However, there are potential problems with LBA, such as: ... The server is cconfigured with two SATA drives running off the system board ... SATA ports) for the boot drive It also has an Intel SRCS16 RAID ...
    (microsoft.public.windows.server.general)
  • Re: OT-True Image Backup
    ... Make sure the USB drives file system is NTFS and not FAT32.. ... Jaymon is correct in that the disk image you create and save to the D: ... partition of your USB external HDD will have no effect on the other ... Since the disk images you will be creating (at least the initial backup ...
    (microsoft.public.windowsxp.help_and_support)