Re: grub error

*** See below.

"Bill in Co." <not_really_here@xxxxxxxxxxxxx> wrote in message
news:%237j%23MHOWIHA.4868@xxxxxxxxxxxxxxxxxxxxxxx
OK, but I'm evidently still missing something here. (I'm trying this
out
now on a good system just to see). (and I'm coming here as a past
Win98SE/DOS user)

Given what is quoted below for a basic formatted disk, how does it manage
to
boot up with no operating system on the floppy? I mean, it just stops
there.

*** Which boot disk are you talking about? The WinXP boot disk
*** or the Win98 boot disk?
*** The WinXP boot disk will boot the machine into Windows XP,
*** provided that there is an intact Windows XP installation on the
*** hard disk.
*** The Win98 boot disk will boot to an "A:\ prompt".

I actually tried it out, and nothing happened except that I was stuck at
the
"a:" prompt, (but this only AFTER I had created a floppy with command.com
on
it.

*** If you download the Win98 boot disk from www.bootdisk.com
*** then you get it complete with command.com. And yes, it will
*** get you to an "A:\" prompt. At this stage you can start working
*** with commands such as fdisk.exe, which would let you replace
*** the Grub boot sector with the Windows boot sector.

Otherwise I got the error Invalid System Disk).

My test prior to that it was just using a basic formatted diskette (with
no
OS on it), and it wouldn't boot, which seems right.

*** I said "Use a disk formatted on a WinXP PC, then copy . . ."
*** If you stop after the formatting step then you obviously won't
*** have a bootable disk.

- Format a diskette on a WinXP PC.
- Copy these files to it from the i386 folder of your WinXP CD:
ntldr and ntdetect.com
- Use notepad.exe to create a:\boot.ini on it, with these lines:

[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Professional" /fastdetect /NoExecute=OptIn
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP
Professional" /fastdetect /NoExecute=OptIn
multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP
Professional" /fastdetect /NoExecute=OptIn


Pegasus (MVP) wrote:
The benefit of the WinXP boot disk is that it lets you boot
a WinXP installation that has a damaged boot environment
but is otherwise intact.

The benefit of a Win98 boot disk is that it gives you very
basic access to the hard disk where you can perhaps
repair the damaged boot environment.

Both disks are useful to have. A Bart PE boot CD is even
more useful to have but it takes time to make one).


"Bill in Co." <not_really_here@xxxxxxxxxxxxx> wrote in message
news:%23r$cQqMWIHA.5132@xxxxxxxxxxxxxxxxxxxxxxx
Well, my system boots up fine now, but I was just wondering if this
method
makes a good backup disk to supplement the MSDOS backup one?

So if windows didn't boot up, I presume this method would be the first
way
to try, and if that fails, maybe you'd need the MSDOS boot disk. Is
that
correct?

cornedbeef007-groups@xxxxxxxxxxxx wrote:
On Jan 17, 10:16 am, "Bill in Co." <not_really_h...@xxxxxxxxxxxxx>
wrote:
Would this also work for WinXP Home (just by changing "Professional"
to
"Home" below)?

No need to change "Professional" to "Home". It's only a label for a
human to read.

OK. It's just a text label then.

I'm curious as to how it works, if you can't even boot up in WinXP
normally. Just looking at the lines below, it seems (to me) to just be
attempting to access the HD as would normally happen except that it is
using a clean version of those two files ntldr and ntdetect.com. So is
that basically it?


The floppy is running the bootloader, and it uses the info in boot.ini
file to find/start Windows.
The 3 choices you'll see are only an attempt to cover all bases of
where your particular Windows installation might be.
It's most likely that only 1 will work, depending on what has happened
to your disk, and whether you've attempted a repair install and
actually ended up with a parallel install.
Make the floppy, and give it a try. You've really got nothing to lose,
and it just might start Windows.

Good Luck.




.

Relevant Pages

  • Re: How to grt rid of dual boot XP??
    ... Win2K to an existing WinXP installation; in my experience, ... The computer probably would not boot until the error is corrected. ... Microsoft Windows MVP ... "Ron Sommer" wrote in message ...
    (microsoft.public.windowsxp.general)
  • Re: Winntsys32configsystemCED Error
    ... First thing to do is to boot the computer and see if you can launch the Recovery Console and access the Windows 2000 installation. ... If, on the other hand, you are sure that you are properly logged on to the Windows installation and can't rename, copy between folder or delete files and are getting error messages, or if the "fixed" installation doesn't want to boot, chances are that there is corruption on the disk and you will have to do the chkdsk to try to overcome the problem. ... One thing that still hangs in my mind that you touched on was running ckkdsk /r, since Dell could not do anything with it, was to run this as the first option rather than the latter. ...
    (microsoft.public.win2000.general)
  • Re: Entry point not found
    ... Open Explorer, go to Tools and Folder Options, on the view tab, scroll to ... I have a brand new hard drive so I'm> thinking of just installing it, re-loading Windows from> scratch and then hook up my old drive as a slave ... As>>far as I can tell, the only way around this would be to> try a clean install>>which entails wiping the drive of all information> currently on it and>>proceeding with setup, this can be done from XP setup as> follows and as>>noted, this will cause you to lose everything on the> partition to which you>>are trying to install XP:>>Assuming your system is set to boot from the CD-ROM> drive, boot with the XP>>CD in the drive. ... >>To Repair a Windows XP Installation using Recovery> Console press R.>>To Quit setup without installing Windows XP, ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Windows XP Home stalls during boot
    ... Assuming your system is set to boot from the CD-ROM drive, ... A few screens into the boot process, if you see the message on the boot ... To Setup Windows XP now, ... To Repair a Windows XP Installation using Recovery Console press R. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: How to grt rid of dual boot XP??
    ... Troubleshooting Windows XP ... >> Then go to the Boot.ini Tab and click on Check All Boot Paths. ... >> This will give you the current Windows folder you are using. ... delete the folder containing the installation you want to ...
    (microsoft.public.windowsxp.general)