Re: Help - I'm in trouble

I installed the drivers during the xp install. I have access to the raid
utility during post and it says the raid is functional.

"DL" <address@invalid> wrote in message
news:e4wKN44MIHA.536@xxxxxxxxxxxxxxxxxxxxxxx
I didnt check your mobo manual, but is it neccessary to install raid
drivers during the winxp installation on this system?
Do you have access to the raid utility during the post sequence, or is
that what you meant by bios sees raid?



"Charlie" <charlie@xxxxxxxxxxx> wrote in message
news:eezp5w4MIHA.1204@xxxxxxxxxxxxxxxxxxxxxxx
I have a ASUS P4P800-E motherboard with a Promise Raid controller and uses
the Promise FastTrack 378 driver. My OS resides on my C drive and I back
up to my D drive. My D drive is actually two hard drives running RAID 0 on
the Promise Raid controller. My C drive went bad and I replaced it and
installed a fresh copy of Windows XP Pro. Everything went well except now
I can't access any of the data on the D drive. The bios sees the array and
indicates it is functional. Windows sees the D drive but says it needs to
be formated. Is there anything I can do to get access to the data. Please
help.





.

Relevant Pages

  • Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
    ... > like a fresh install and porting their application and data to the new system. ... PERC4/Di RAID on the motherboard, Dell DLT tape drive, Dell slimline ... PATA connector usable for two PATA drives. ... After downloading drivers from both SCO and Dell to create the ...
    (comp.unix.sco.misc)
  • Adaptec IDE RAID: No boot devices were found
    ... >Both drives jumpered to Master ... >Adaptec ATA RAID 1200A Drivers Installed at O/S install. ...
    (microsoft.public.win2000.setup)
  • Re: New Lightwave Workstation
    ... Id imagine it's better to install a PCI Sata raid ... RAID, in which parity data to reconstruct drive data ... drives can fail simultaneously and can be replaced without data loss. ... total addressible memory and that has to account for all memory addresses in ...
    (comp.graphics.apps.lightwave)
  • Re: need help configuring RAID on my P5WD2E-P
    ... "Generally" you enter the raid bios setup on reboot, ... the drives being SATA adds to the complexity. ... Acronis TrueImage is a good product to use. ... install the drivers now, so they'll be there after the restore. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: XP Crashed - How can I copy my data from the RAID 1 drives?
    ... Glad you are on the track to recovery and a clean install is a great idea after ... As far as personal firewalls go I believe that the Windows Firewall does a great ... delete the RAID and formatted 1 drive and am now in the middle of 48 Windows ... I deleted the RAID set and know have 2-more drives than I had before (the ...
    (microsoft.public.windowsxp.security_admin)