Re: STOP Error on Install Repair

Background information on Stop Error code
http://msdn2.microsoft.com/en-us/library/ms795746.aspx

If you install the problematic hard drive as a second drive can you see
the drive to recover your data?

Try running HD Tune(freeware).

Download and run it and see what it turns up regarding the problem
drive.
http://www.hdtune.com/

Select the Info tabs and place the cursor on the drive under Drive
letter and then double click the two page icon ( copy to Clipboard )
and copy into a further message.

Select the Health tab and then double click the two page icon ( copy
to Clipboard ) and copy into a further message. Also do a full surface
scan with HD Tune.

What is the make of the problem drive?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


drnate wrote:
Hello!

My Pentium 4 / Intel Mobo would not power on one day, so I replaced
it with
a Biostar NF520-A2 w/ AMD X2 64 4000+ Processor w/ 1 GB DDR2 PC4200
(2 X 512 in Dual Channel configuration 160 GB Seagate SATA drive). I
installed my old hard drive and put the Windows XP CD ROM in the
drive and proceded to repair the installation (as instructed at
http://www.michaelstevenstech.com/XPrepairinstall.htm under XP Repair
Install). The computer reboots, proceeds with the Windows XP Screen
with the moving bar along the bottom and then produces the following
STOP Error:

STOP: 0x0000007E (0xC0000005, 0xF7591750, 0xF791042C, 0xF7910128)

BIOS Caching is turned off.
I can't even get in via Safe Mode.

I had another hard drive, so I installed a clean copy onto that one
and it works just fine. I have files on my old hard drive that have
not been backed up, so a clean install could be an option, but a
tedious, long, drawn out one.

Do you have any suggestions?

Thank you for looking.
drnate


.

Relevant Pages

  • Re: XP wont start
    ... Error code 4". ... When I boot from the setup CD, ... > through a few steps (like asking if you want to install SCSI support, ... > and or a registry repair. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: and again ntfs in fbsd
    ... not being an code worrier myself, I usually update my port tree first, then ... do a clean install like that, ... *** Error code 1 ...
    (freebsd-questions)
  • Re: Windows XP SP3 and .NET upgrades
    ... Verify the installation of both .NET Frameworks: ... There is .NET 2.0 already installed but I cannot either repair or remove it. ... KB928366 - error code 0xE0434F4D ... Please install the .NET Framework. ...
    (microsoft.public.windowsupdate)
  • Re: advanced programming unix environment
    ... I would appreciate if somebody else running freebsd 7.0 could download source and see if it makes fine on their installation. ... *** Error code 1 ... be unable to log in as root in any way, ... After the initial install I was able to log ...
    (freebsd-questions)
  • Re: Problem on start-up
    ... while a repair install should leave your data ... >>Assuming your system is set to boot from the CD-ROM ... >>with the option to setup Windows or Repair ...
    (microsoft.public.windowsxp.accessibility)