STOP Error on Install Repair



Hello!

My Pentium 4 / Intel Mobo would not power on one day, so I replaced it with
a Biostar NF520-A2 w/ AMD X2 64 4000+ Processor w/ 1 GB DDR2 PC4200 (2 X 512
in Dual Channel configuration 160 GB Seagate SATA drive). I installed my old
hard drive and put the Windows XP CD ROM in the drive and proceded to repair
the installation (as instructed at
http://www.michaelstevenstech.com/XPrepairinstall.htm under XP Repair
Install). The computer reboots, proceeds with the Windows XP Screen with the
moving bar along the bottom and then produces the following STOP Error:

STOP: 0x0000007E (0xC0000005, 0xF7591750, 0xF791042C, 0xF7910128)

BIOS Caching is turned off.
I can't even get in via Safe Mode.

I had another hard drive, so I installed a clean copy onto that one and it
works just fine. I have files on my old hard drive that have not been backed
up, so a clean install could be an option, but a tedious, long, drawn out one.

Do you have any suggestions?

Thank you for looking.
drnate
.



Relevant Pages

  • Re: PLEASE HELP: 2 ERROR MESSAGES
    ... The advice to do a repair install, turned out to be a grievous and expensive ... The repair install caused a corruption and windows became ... It seems as though it would not boot from the CD ...
    (microsoft.public.windowsxp.general)
  • Re: Problem on start-up
    ... while a repair install should leave your data ... >>Assuming your system is set to boot from the CD-ROM ... >>with the option to setup Windows or Repair ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Microsoft internet explorer has encountered a problem ...
    ... with the repair, you may want to uninstall it and wait until a later date to ... However, should you choose to repair, you MUST reinstall ALL the updates ... IE SP1 - How to Install ... Method 2 in this article works on earlier versions of Windows. ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Start Menu, Icons Not Appearing
    ... Also, make sure your system has no malware, download, install and run Ad ... Assuming your system is set to boot from the CD-ROM drive, ... To Setup Windows XP now, ... To Repair a Windows XP Installation using Recovery Console press R. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: VIRUS in MBR? Do Repair Install via Michael or Dougs Directions
    ... Do a repair install and you won't lose your data and settings. ... A Repair Install will replace the system files with the files on the XP CD ... but Windows updates will need to be reapplied. ... This portion of the Setup program prepares Microsoft ...
    (microsoft.public.windowsxp.general)