Re: Windows XP Crash
- From: lamedolphin <lamedolphin@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 21 Sep 2007 10:40:04 -0700
You are both too kind to help me out, thanks a lot!!!
I tried the article too, no help. I wrote the ren thing right in the console
and the names are changed. Puter couldn't find the msgina.dll but the others.
then I tried to go in from windows, but without the proper msgina no way. so
I tried to go to D:\ but puter went to D and right back to C:\. Tried every
letter to see, if its there (CD-ROM) but it told me no disk to find there (it
WAS in the player).
How can I find the CD on console?
Thanks again
Ursula
"WindowsXPert" wrote:
I'm pretty sure that article takes you through a process similar (if not.
identical) to the one in my earlier post.
By the way, the command you were having a problem with earlier --is REN
(R-E-N) *not* REM (R-E-M). In a batch file, "REM" means "Remark" and the
command processor ignores everything which follows until the next [ENTER]
character appears. REN (R-E-N) is short for RENAME, which you can type all
the way out, if you wish.
Hope this helps.
Sam French
"Daave" wrote:
We overlooked something! See:
"Logon User Interface DLL Msgina.dll failed to load" error message after
you install the MS04-003 security update"
http://support.microsoft.com/kb/836683
"lamedolphin" <lamedolphin@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F7CC86DE-B18E-4E77-A33A-360731F56D3F@xxxxxxxxxxxxxxxx
Got the thing with the cd.. wrong, did not put the space in ;) .
My Problem now is to get the CD-Rom working to copy.
When I go down it shows the D:\ comes but back to C:\ ...
Thanks if you can help me here out
Ursula
"lamedolphin" wrote:
on console i get until end of #2 the following command is not
possible.
Now the second time it tells me the rem command is not recognized.
eithrt is the cd..
"Daave" wrote:
Additionally, Ursula, you need to make sure you boot off the CD.
You
should access your BIOS setup *before* the PC attempts to boot off
your
hard drive, then configure it to boot off the CD, then you should
be
fine. See http://www.michaelstevenstech.com/bios_manufacturer.htm
for
how to do this.
At this point, you should be able to use the Recovery Console from
your
installation CD.
(Do you have an installation CD? Or is it a different type of
"WinXP
CD"?)
WindowsXPert wrote:
1. Boot to Recovery Console.
2 . type the following commands
cd system32 [enter]
ren winlogon.exe winlogon.old
ren msgina.dll msgina.old
ren shell32.dll shell32.old
ren shlwapi.dll shlwapi.old
cd.. [enter]
cd servicepackfiles\i386 [enter]
copy MSGINA.DLL c:\windows\system32
copy SHELL32.DLL c:\windows\system32
copy WINLOGON.EXE c:\windows\system32
copy shlwapi.dll c:\windows\system32
if not there, expand from the cd
3 Type EXIT and hit enter
"lamedolphin" wrote:
Please help anybody!
My laptop crashed yesterday. and it want open windows.
It is askink for msgina.dll and to notify administrator, asking
for
restart adn this again and again.
Copied the file on a disk from my big computer, but how can I
feed
it in now? Can`t fin also no feature to make a start up copy to
try
this.
Have the original WinXP CD but it doesn`t work either.
Pleas help somebody
Thank you
Ursula
- Follow-Ups:
- Re: Windows XP Crash
- From: lamedolphin
- Re: Windows XP Crash
- References:
- Re: Windows XP Crash
- From: Daave
- Re: Windows XP Crash
- From: lamedolphin
- Re: Windows XP Crash
- From: Daave
- Re: Windows XP Crash
- From: WindowsXPert
- Re: Windows XP Crash
- Prev by Date: Re: Poor real time operation in DOS emulation mode
- Next by Date: Re: ISO image help needed
- Previous by thread: Re: Windows XP Crash
- Next by thread: Re: Windows XP Crash
- Index(es):
Relevant Pages
|
Loading
