Re: Files and settings transfer.

Sirius <anyone@xxxxxxxx> wrote:
Hello,

I built a better new computer. I would like to transfer everything to
it. I would like to do it with a cable but the new PC does not have
any COM ports. How can I make the Wizard use a USB cable?

Thank you.

You can't (unless you're using a USB attached hard drive as a transfer
point, which is what I'd do). Another option would be an Ethernet connection
(either straight-through cables to a switch/hub, or a crossover cable
between them).


.

Relevant Pages

  • Re: 442 TA3F output question... cant get optimum gain levels into Lectro transmitters.
    ... I know I could just get some TA3F to TA5F cables with attenuation ... built in, but that doesn't solve the problem of having too little Mic ... feed my Lectrosonics transmitters and my gain with 0DB tone at about 9AM on the pot when the -20 light just barely glows. ...
    (rec.arts.movies.production.sound)
  • Re: 442 TA3F output question... cant get optimum gain levels into Lectro transmitters.
    ... I know I could just get some TA3F to TA5F cables with attenuation ... built in, but that doesn't solve the problem of having too little Mic ...
    (rec.arts.movies.production.sound)
  • Dead Hard Drive
    ... Recently I built a new PC. ... all the settings in the BIOS and made sure cables were all securely ... disconnected the hard drive from my old computer to reconnecting it to ... my new computer (a matter of minutes)? ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Forth Bridge painting programme
    ... The cables concerned are the main cables, ... Claims that the existing bridge is falling down were used to lobby ... That is why the "Forth Replacement Crossing Study" makes no ... bridge is built, but rather devotes its attention to using the ...
    (uk.railway)
  • Re: FREE- One Touch Cable Schematics
    ... Serial cables, USB cables. ... I built my own computers for years. ... I just built some shelves to prove I could do it. ...
    (alt.support.diabetes)