Re: Boot To Dos CDROM

Thank you, I appreciate the replies.

"Patrick Keenan" <test@xxxxxxxx> wrote in message
news:emMOwm5rHHA.4860@xxxxxxxxxxxxxxxxxxxxxxx
"Mark" <marco@xxxxxxxxxxxx> wrote in message
news:OOEbEA4rHHA.1404@xxxxxxxxxxxxxxxxxxxxxxx
Thanks Gary. I'm surprised you are still lurking in this NG, Vista
newsgroups seems to have stolen the good gurus. Glad you are still
available to help out.

I just copied the ISO to a CD, now I see why that didn't work. I found
out that I have to use my Nero to make a bootable CD. That worked. Now,
I have a bootable CD with the Ultimate Boot CD ISO, but can't see or use
any of the options.

I've used XP repair, works good, so I'd better just stay with that
method. I had hoped to have all of the repair options on a bootable CD so
I can repair PCs for folks in my computer club, so I don't have to carry
a list of the commands...fixboot, fixmbr, sfc scanonce, all of those
goodies.

Those are all on stock XP boot disks via the recovery console, but, sfc
will require the correct type of CD and will ask for the disk. It checks
files between the hard disk and the install CD, so you can't make a
generic disk to use sfc; you need the correct disk type for that machine.

However, you can use any bootable XP disk to get into the recovery console
and run many of the other commands.


HTH
-pk



"Gary S. Terhune" <none> wrote in message
news:%23$VNkz3rHHA.1172@xxxxxxxxxxxxxxxxxxxxxxx
Not sure, but one thing you say gives me pause: Did you simply copy the
ISO files to CD or did you use a utility that is intended to properly
place the image (contents of the ISO file) onto the CD.

Note that DOS is pretty much useless for working on Windows XP systems,
especially if the partitions are formatted in NTFS. In fact, FIXBOOT
isn't a DOS function at all. What you need is to boot to a Windows XP
installation CD and use the Repair Console, or, I suppose, use a BartPE
CD or similar.

Lastly, while you say you can boot to the CD, it doesn't sound like
you're actually succeeding when you describe the process. Are you sure
your system is even trying to boot to the CD? Is your BIOS boot sequence
properly arranged to have the CD boot before the HD?

--
Gary S. Terhune
MS-MVP Shell/User
www.grystmill.com

"Mark" <marco@xxxxxxxxxxxx> wrote in message
news:ONbNKm3rHHA.404@xxxxxxxxxxxxxxxxxxxxxxx
I'm burning a lot of worthless CDs trying to make one to boot to DOS
(no floppy drive available).

I've downloaded several programs to boot to DOS, unzipped them, and
burned the iso to a CD. When I boot to the CD I get the Hardware
Profile Configuration Recovery Menu, which shows Profile 1...no other
option except to boot to last good config, etc. When I hit enter it
boots to XP.

I need a CD ROM that will allow me to boot to DOS to run the various
fixmbr, fixboot commands, when trying to repair a PC that has a
corrupted hard drive.

I must be too dense, the CDs have the ISO image, and I am booting to
the CD. TIA









.

Relevant Pages

  • Re: Inaccessible_Boot_Device
    ... I decided to re-run the repair procedure. ... "inaccessible boot device," I selected Fixboot. ... I do a total disk backup to an external CD about every three months (takes ... switch drives, and attempt to copy folders/files to an external hard ...
    (microsoft.public.win2000.general)
  • Re: Disk Utility and Disk Repair
    ... Now the repair button is grayed ... then hold down T at startup on one of them to boot into Firewire ... Target Disk mode, you can boot the other Mac and Mac OS X will mount ... If you have the installation CD/DVD, all you need to do is boot from the installation CD/DVD, then run Disk Utility from the menu bar, and repair the problem disk. ...
    (comp.sys.mac.system)
  • Re: disk boot failure
    ... The error "Disk boot failure, insert system disk and restart" indicates the ... Usually a "repair" corrects the problem - I may repeat info of which you are ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Disk Utility and Disk Repair
    ... Now the repair button is grayed ... then hold down T at startup on one of them to boot into Firewire ... Target Disk mode, you can boot the other Mac and Mac OS X will mount ... If you have the installation CD/DVD, all you need to do is boot from the installation CD/DVD, then run Disk Utility from the menu bar, and repair the problem disk. ...
    (comp.sys.mac.system)
  • Re: STOP : INACCESSIBLE BOOT DEVICE (0x0000007B, ...)
    ... Try pressing F8 early during the boot phase, ... may have some file corruption or perhaps a bad cluster on your disk. ... Depending on your level of experience, you may ask a repair shop ...
    (microsoft.public.win2000.general)