Re: Boot CD won't recognize hard drives



<badyan@xxxxxxxxx> wrote in message
news:1178270544.176560.91490@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have a very serious problem I've been trying to solve for weeks now.
I need to format my hard drive, but the problem is that when I try to
boot from the XP installation disk it doesn't recognize the HDs. This
also happens with other boot CDs I've tried.
The drives themselves are fully functional when I boot from them.
When I entered BIOS, I saw that there is no Primary IDE Master
detected (only the CD-ROM as Secondary), but when the computer boots
there is an IDE detection phase where I see that the hard drives are
being detected.
I also tried installing windows using the CD from within windows, but
then when the computer restarts I get a blue screen.
My computer is infected with viruses, so maybe that is related too.
I tried updating my BIOS version but to no avail.

If you have any idea, please feel free to share... :)

Almost certainly you are lacking a driver. The boot cd will have lots of
drivers on it, but it may not have the driver you need.

The chances are that if you have the CD that came with your motherboard then
that will probably have the necessary driver on it. It may have been
supplied on a separate floppy. If you don't have it then visit the website
of the manufacturer of your motherboard.

When you boot from the cd at the start it gives the option to press a key (I
don't recall which) if you need to load a driver. You'll need to do that,
then a little while later it will ask for the driver.

I've had problems in the past when trying to install on SCSI or SATA drives.
Not had a problem with IDE though, but it sounds very much like a driver
issue.

Hope this helps.
--
Brian Cryer
www.cryer.co.uk/brian


.



Relevant Pages

  • Re: Win 98 Motherboard Recommendation Needed
    ... MPV chip set, Win 98 SE, 80 GB Maxtor IDE hard drive, and ATI Radeon ... drive to boot your old computer - the "rescue" computer. ... Microsoft driver. ... get an old OS to work with newer hard drives like SATA. ...
    (alt.comp.hardware.pc-homebuilt)
  • Boot CD wont recognize hard drives
    ... boot from the XP installation disk it doesn't recognize the HDs. ... there is an IDE detection phase where I see that the hard drives are ... I also tried installing windows using the CD from within windows, ...
    (microsoft.public.windowsxp.general)
  • Re: no hard disk drive detected on installation
    ... > (the boot: ... > I booted bf24 and it detected the hard drives. ... IDE that blocks detection of the ultra ata? ...
    (Debian-User)
  • Re: soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem
    ... > What messages are you getting from boot log and dmesg? ... ACPI tables contain no PCI IRQ routing entries ... RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize ... USB Universal Host Controller Interface driver v2.2 ...
    (comp.os.linux.hardware)
  • Re: Boot up problem... with a difference
    ... Safe mode boot is fine. ... Looked further into the last errors and noticed PXRD Driver. ... Event Type: Error ... Windows cannot unload your classes registry file - it is still in ...
    (microsoft.public.windowsxp.help_and_support)