Re: Gateway XP MCE CD

Each PC manufacturer has a different way to handle such things. Some
provide real CDs, but other porovide CDs that only contain small programs
that cause a hidden partition of data on the hard drive to be used to
restore C:\.

Your best bet is to contact Gateway support. As a minimum they should be
able to tell you how to restore the PC to the day you bought it. They owe
you that. As for getting the PC working without completing the restore,
Gateway might be able to help. Ask then whether what you did so far
formatted the hard drive, or deleted partitions, etc. If yes, the odds of
fixing are very small, other than to complete the restoration process.

But, be aware that there are some third-party programs that can unformat a
disk or restore lost partitions. These work only if nothing has been
written to the hard drive since the format or the partition delete. Note
that a long-format does write to the disk, but a short format only erases
the pointers to files. Gateway should know which, if either, their
restoration CD invokes. A local PC repair shop might know about these and
for a small diagnostic fee might be able to tell you whether there is some
hope.

You might alos learn something by Goggling "parititon undelete".

As for the use of an XP CD to examine the hardware, if it was provided by a
different PC maker, it might be specific to the hardware of that other PC.
That is, not all XP CDs are equal. For example, SATA hard drive controllers
require special drivers. A PC maker may include those with their XP CD.
But, those drivers will only work on their hardware, not on a random PC. In
contrast, the full retail verison of XP provides no such drivers, but
provides the option to hit F6 and load them from a floppy (yes a floppy, not
a CD).

A way to get around the limitations of XP CDs is to download and burn a
"live" LINUX CD. "Live" means that LINUX will run from the CD, without
installing anything on the hard drive. KNOPPIX is among the best,
supporting most hardware, and has a windows-like (really MAC-like)
interface. It is free, but it is a large download, about 700 Meg. Be sure
to burn to a CD using a program like Nero or Easy CD Creator, which supports
"burn from image" or similar. Do not simple drag&drop the ISO file to a CD.
That won't work. Links to KNOPPIX:

http://www.knopper.net/knoppix/index-en.html
http://www.knoppix.net/wiki/Main_Page
http://www.knoppix.net/wiki/Rescue_FAQ

If KNOPPIX can see the disks, then they have some normal format (e.g.,
FAT32, NTFS). If it can see data, then they have not been reformated. If
it can see data, then it can also recover data, by simply copying to an
external hard drive (USB or firewire), flash drive, ZIP, etc. KNOPPIX also
comes with a CD burner.

If KNOPPIX does not see the disks, then they may have temporarily be give
some unusual format. More likely the format bit in the boot record was
changed as part of the restoration process. Some software does this to
prevent other programs from operating on the disk while they are using it.
In such a case a solution can be to fix that format bit. I would suggest a
good PC repair shop. But, there are programs on the web that offer to do
this, for power users who know what they are doing.

<brucegengler@xxxxxxxxxxx> wrote in message
news:1176638109.812168.145050@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have a Gateway FX510XL. I was looking for some drivers so I put the
Gateway MCE CD in. The cd came up in recovery mode and the only
options available were full format or full format with backup. I was
not looking to reformat my drive so I chose quit. The computer
rebooted and went in to recovery again. Now all it does is reboot to
recovery and offer the option to reformat or quit.

I took and XP cd for my laptop and booted from it. If I choose
install it replys that there are no disks on the system. I have 2
Hitachi 500 gb drives and I had them tested and they're fine.

Does anyone know what the Gateway recovery disk did to my system? How
can I get the pc to recognize the hard drives again?

Thanks, Bruce



.

Relevant Pages

  • Re: What will play a vob format?
    ... huge hard drives. ... but apparently won't see the same format on ... DVDs run about 10Mbps and it doesn't take more than a few sessions to saturate a 100MBPS network and a server disk channel. ...
    (comp.os.linux.misc)
  • Re: Imaging an NTFS Drive
    ... when you are using DI to restore an image. ... with the file system so the partition and format get effectively replaced. ... It's no different if you are using NTFS with XP. ... C drive running XP to my FAT32 slave disk and yes I have restored the image ...
    (microsoft.public.windowsxp.general)
  • Re: HD Video on regular DVD?
    ... output format is, perhaps AVI like when editing regular DV format ... My question is about playback and output to disk. ... The DVD will gladly hold any data up to its size limits, ... with the price of hard drives now a days. ...
    (rec.video.desktop)
  • Re: Subject: Re: Compiling CP/M-86CCP/M-86
    ... from CopyQM to a standard disk image). ... with MFM hard drives. ... CP/M-86 1.1 - Booted from floppy image and used HDMAINT to format ... HDMAINT result in "Unexpected Interrupt" errors as do attempts ...
    (comp.os.cpm)
  • Re: Unallocated space marked as allocated in MFT
    ... Microsoft MVP: Windows Server ... > You say to format the C drive using any method. ... boot from the TI's disk and restore C drive from the backup file on the ...
    (microsoft.public.windows.file_system)
Loading