Re: Help Please: XP Recovery Console Administrator Password Problem

John, I just wanted to get back to you to let you know that your
inital solution worked (to enable the auto-logon policy). My long-
term problem (not having the password based on a corrupted(?) ghost-
install) is a problem for another day.

Out of curiosity, do you format your hard drive and start over
periodically just for the heck of it? Just in case you get a rootkit
on your system that goes unnoticed by your antivirus/antispy-ware. I
often wonder if I should do that much more often than I do. Again,
thanks again for your help. Now I have a different problem I need
help solving. I'll post that one in this forum momentarily.

Thanks again! Rich


On Mar 20, 7:55 pm, John John <audetw...@xxxxxxxxxxx> wrote:
If you used Sysprep to prepare the Ghost image that could be the
problem. Is your Windows XP CD at SP1 or better? If enabling
Auto-Logon for the console doesn't work take a look here:http://support.microsoft.com/kb/308402 You can also use the floppy
diskettes, they have been updated to correct the problem.

John

riffin-rich wrote:
John I'm not sure what a sysprep image is, but I do believe I recall
this load being a restoral from a Norton Ghost image that I had
previously created. Is that what you're talking about? I'll have to
take a look at the article you mentioned in your other post ... I'm
assuming that is the fix I need ... ? Also, I did have the password
exactly correct ... case and all. Thanks again. Rich

On Mar 20, 1:00 pm, John John <audetw...@xxxxxxxxxxx> wrote:

Oh, by the way, if you installed XP from a sysprep image that might be
the problem. There is a hotfix for that or you can download the Setup
Boot Diskette Set from Microsoft.com to log on to the RC.

John

riffin-rich wrote:

YOU ROCK, John. I'll try it when I get home tonight. To think I got
so mad yesterday that I almost formatted my hard drive and started
over. I'm glad I took a day off, went to bed early, and thought to
post here. Thanks for helping. Thanks much! Rich

On Mar 20, 11:07 am, John John <audetw...@xxxxxxxxxxx> wrote:

If you enable the Allow automatic administrative logon policy on the
Recovery Console you will not be asked for a password to use it. Do as
it says in the Microsoft article that I posted earlier. With XP Pro you
can use either methods, with XP Home being that there is no Group Policy
tool you have to do it by way of registry edits. With XP Pro to access
the Group Policy tool use the Control Panel applet or click Start | Run
type gpedit.msc and then click OK or press enter.

John

riffin-rich wrote:

I also forgot to ask about your second portion: "If you can boot to
the Windows you can also enable Auto-Logon for the
Recovery Console with Group Policy, it's in the Local Security Policy.
For XP Home Edition edit the registry:
http://support.microsoft.com/kb/312149";

I am using Windows XP Pro and I can still boot to windows ... I need
to enter a string of grub commands to get into Windows, but I can
still get there. If I enable the policy in XP Pro (assuming it's the
same as for XP Home), how does that work? I'll just boot straight to
the recovery console? Thanks again, Rich

On Mar 20, 10:27 am, John John <audetw...@xxxxxxxxxxx> wrote:

The password to enter is the one for the local administrator account;
the built-in administrator account, not your administrator account.
Perhaps it's just blank, try leaving the field blank and just press enter.

If you can boot to the Windows you can also enable Auto-Logon for the
Recovery Console with Group Policy, it's in the Local Security Policy.
For XP Home Edition edit the registry:http://support.microsoft.com/kb/312149

John

Rich wrote:

Hello. I hope someone can help... I have a broken Linux install dual
booting system and I want to restore my normal windows XP boot
process. I inserted my Win XP disc and booted from the CD. I want to
"R"epair my windows installation on "1. C:\Windows" and the system
asks me for my Administrator password. Here's my problem. I enter my
Administrator password, but, it's not accepted ... it says it's
wrong. I even aborted the process and logged in as the
"Administrator" to verify that I know the password. Note, I never
renamed the Administrator account ... it's still "Administrator"

So I tried the recovery again and still no good ... says I am using
the wrong password. Then, I logged in as the Administrator again and
changed my password to be empty/null. Even this is rejected during
the repair process.

Has anyone ever seen this before? How can I recover without
formatting my hard drive? UGGGGH! Thanks kindly, Rich (please don't
reply via e-mail ... dead account for spam prevention)- Hide quoted text -

- Show quoted text -- Hide quoted text -

- Show quoted text -


.

Relevant Pages

  • Re: Must all users be administrators?
    ... The familiar look of the AD objects tree you see in Group Policy Editor is ... This seems modestly confusing to an SBS Administrator because there's very ... those rights happen to be nearly unlimited. ... sit a workstation logged on as the Local Administrator, by default, there ...
    (microsoft.public.windows.server.sbs)
  • Re: Help Please: XP Recovery Console Administrator Password Problem
    ... If you enable the Allow automatic administrative logon policy on the Recovery Console you will not be asked for a password to use it. ... With XP Pro you can use either methods, with XP Home being that there is no Group Policy tool you have to do it by way of registry edits. ... I am using Windows XP Pro and I can still boot to windows ... ... the built-in administrator account, not your administrator account. ...
    (microsoft.public.windowsxp.general)
  • Re: The local policy of this system does not permit you to logon i
    ... Security policies were propagated with warning. ... Error 0x534 occurs when a user account in one or more Group Policy objects ... I have checked the security policies & the administrator profile is not ...
    (microsoft.public.windows.server.sbs)
  • Re: Administrator unable to log on Interactively
    ... Firstly i tried accessing the domain controller C drive ... I think the policy has been changed in the "local security ... >> administrator is not able to log on interactively. ... >Interactive Logon setting takes precedence over the Allow ...
    (microsoft.public.win2000.security)
  • Re: Administrator is not the "Boss" on this machine.
    ... policy, I'd see two columns, one for "setting" ... > you can not run that command you may not be logged on as an administrator. ... > If you messed with Group Policy settings for user configuration the solution above ...
    (microsoft.public.win2000.security)