Re: "System Cannot Recognize the CD"

Unplug the power to the CD rom and boot the computer.

The error that you see is extremely strange, may indicate a short in the
electronics, and issue with the motherboard or other. Check to see if
the BIOS has both RAID ports enabled.

Also, plug only 1 SATA HD in at a time, you may have a bad SATA drive.

Sorry if I repeated stuff.

.

Relevant Pages

  • Re: "System Cannot Recognize the CD"
    ... Unplug the power to the CD rom and boot the computer. ... The error that you see is extremely strange, may indicate a short in the ... electronics, and issue with the motherboard or other. ...
    (microsoft.public.windowsxp.general)
  • Re: ANNEX Terminal Concentrator
    ... When I go into the monitor, ... REV ROM: Maj Rev 99 Min Rev 0 ... > I wish to use it as a terminal concentrator for some Sun Boxes. ... > Where I work have a couple of these that are able to boot from themselves. ...
    (comp.sys.sun.hardware)
  • Re: Ok, how do I format and reinstall
    ... KEEP YOUR XP CD Rom handy. ... screen that says "Boot Order." ... Rom drive will begin reading your XP install CD. ... # 13 Select the option to delete the partition. ...
    (microsoft.public.windowsxp.general)
  • Re: Ok, how do I format and reinstall
    ... KEEP YOUR XP CD Rom handy. ... screen that says "Boot Order." ... Rom drive will begin reading your XP install CD. ... # 13 Select the option to delete the partition. ...
    (microsoft.public.windowsxp.general)
  • Re: Why no Model II emulator?
    ... There are no ROMs - just a small boot ROM to load and execute the boot ... It's really basically a Z-80 emulator that is ... You'd need to emulate the ROM to some extent to boot a TRSDOS ...
    (comp.sys.tandy)
Loading