Re: Seeking upgrade advise for motherboard change with oem windows

Welsh Wizard wrote:

Will look into it ken, the slowness sees to have become prominent
since the installation of this years norton internet security package
whick auto loads then seeks updrades for the anti virus etc so the
computer is really unresponsive till this has finished, thought more
memory might speed it up a bit :)


Then the solution to your problem is to dump Norton. In my view it's not
only a performance hog, it's the worst security software on the market.

There are several better alternatives that are freeware.

--
Ken Blake - Microsoft MVP Windows: Shell/User
Please reply to the newsgroup


"Ken Blake, MVP" wrote:

Welsh Wizard wrote:

POP- You are right the ram is letting me down


I doubt it. Unless you are running particularly memory-hungry
applications (e. g. editing large graphic imnages or videos), 512MB
is sufficiemnt for most people.


i currently have 512mb
of 2100 speed ddr sdram i think, it takes 10min or so for pc
to start up


My personal view is that the attention many people pay to how long
it takes to boot is unwarranted. Assuming that the computer's speed
is otherwise satisfactory, it may not be worth worrying about. Most
people start their computers once a day or even less frequently. In
the overall scheme of things, even a few minutes to start up isn't
very important. Personally I power on my computer when I get up in
the morning, then go get my coffee. When I come back, it's done
booting. I don't know how long it took to boot and I don't care.

However ten minutes is a very long time. If you do want to address
it, it may be because of what programs start automatically, and you
may want to stop some of them from starting that way. On each
program you don't want to start automatically, check its Options to
see if it has the choice not to start (make sure you actually choose
the option not to run it, not just a "don't show icon" option). Many
can easily and best be stopped that way. If that doesn't work, run
MSCONFIG from the Start | Run line, and on the Startup tab, uncheck
the programs you don't want to start automatically.

However, if I were you, I wouldn't do this just for the purpose of
running the minimum number of programs. Despite what many people
tell you, you should be concerned, not with how *many* of these
programs you run, but *which*. Some of them can hurt performance
severely, but others have no effect on performance.

Don't just stop programs from running willy-nilly. What you should
do is determine what each program is, what its value is to you, and
what the cost in performance is of its running all the time. You can
get more information about these at
http://castlecops.com/StartupList.html. If you can't find it there,
try google searches and ask about specifics here.

Once you have that information, you can make an intelligent informed
decision about what you want to keep and what you want to get rid of.

--
Ken Blake - Microsoft MVP Windows: Shell/User
Please reply to the newsgroup



and for me to get acces to internet after all
programs/internet security have loaded up etc but the 1 GB 2700 ram
i've bought is for the motherboard i want to put in as i seem to
have been unlucky in that my motherboards specifications are quite
dated and don't allow me much scope in upgrading to faster ram or
processor.Will look into the links, cheers..:) Paul

"Pop" wrote:

Welsh Wizard wrote:
Hi,

Having tinkered with upgrading pci cards, various accessories and
wireless internet for my aging pc i wanted to upgrade my current
motherboard to allow a faster processor etc. Having read the
Knowledgebase forums i am now quite unsure about it all as its
given me more q's than answers !!

My computer is 5 yrs old and as i'm studying for a computer
maintenance course i wanted to use my pc as some practical
practice for me, without breaking it !

The operating system is an OEM version of windows xp home saved on
a hard disc partition i believe, and i have a reload/backup cd for
it. The original motherboard became faulty 2/3 yrs ago and was
replaced under warrantly by the seller TIME Computers (who have
since gone bust) , the product key for windows on the case is
different to the findings of the belarc program- i asume it's
because of the motherboard change ? The belarc program has given
me the "current" windows product id and windows product key.

My current processor is an athlon 1400, slow and struggles a lot,
very slow by todays standards and is the reason for the
motherboard upgrade as the current board can only be upgraded to
1800 , so hardly seems worth it.

I wanted to stay with an MSI "a" socket motherboard like my
current one, and i have bought one in readyness but am now worried
that i am not in a position to do an upgrade due to microsoft
rules over oem xp, or that i may have difficulties with product
keys etc although the computer does seem to be restarting itself
quite often recently, the same problem as the old motherboard
before it was replaced !

Any help or advice would be greatly appreciated, do i go for the
change in motherboard or am i creating BIG problems if i do ?

Many thanks

Paul


Fits, I would think if you think an Athalon 1400 is slow, I would
wonder why. What are you doing? 3-D games and playing DVD movies
maybe?

If not those things, I would make sure you have plenty of RAM.
It's the most cost effective performance enhancement you can do.

With that said,
Be sure you understand the Activation issues. You are heading into
a high risk area regarding licensing issues. I found this page
extremely enlightening.

http://aumha.org/win5/a/wpa.htm

Here is another outstanding reference.
http://michaelstevenstech.com/moving_xp.html

Having walked the road and went from an Athalon 1600+ to a Pentium
Celeron-D 3.3, Good luck and say your prayers. (I don't see much
difference in actual throughput).

Pop


.

Relevant Pages

  • Re: Seeking upgrade advise for motherboard change with oem windows
    ... original question was i need to upgrade my motherboard but i only have an oem ... version of windows, oem supplier has since gone bankrupt so no back up. ... you to repair windows on an upgrade. ...
    (microsoft.public.windowsxp.general)
  • Re: Windows XP hardware upgrade
    ... I have just upgraded my PC with a new Motherboard, Processor, and Graphics card. ... I now find that I am unable to start Windows. ... Normally, and assuming a retail license (many factory-installed OEM installations are BIOS-locked to a specific chipset and therefore are *not* transferable to a new motherboard - check yours before starting), unless the new motherboard is virtually identical to the one on which the WinXP installation was originally performed, you'll need to perform a repair installation, at the very least: ... How to Perform an In-Place Upgrade of Windows XP ...
    (microsoft.public.windowsxp.general)
  • Re: Seeking upgrade advise for motherboard change with oem windows
    ... Ken Blake - Microsoft MVP Windows: ... i've bought is for the motherboard i want to put in as i seem to ... wireless internet for my aging pc i wanted to upgrade my current ... me the "current" windows product id and windows product key. ...
    (microsoft.public.windowsxp.general)
  • Re: Seeking upgrade advise for motherboard change with oem windows
    ... upgrade of xp in order to complete my motherboard upgrade? ... installation of Windows after the motherboard change, ... If you are willing to reinstall Windows cleanly, yes, all you need is an XP ... Ken Blake - Microsoft MVP Windows: ...
    (microsoft.public.windowsxp.general)
  • problems upgrading Home XP to Professional
    ... I have no SP2 CD. ... First, I couldn't do Windows Update, so I had to add BITS and WUAUSERV to the ... The other problem now seems to be that I cannot access any of the Security ... upgrade process. ...
    (microsoft.public.windowsxp.general)
Loading