Re: how do you reboot with out disk?



To do a clean install, boot the Windows XP install CD-Rom. Setup inspects your computer's hardware configuration and then begins to install the setup and driver files. When the Windows XP Professional screen appears, press ENTER to set up Windows XP Professional.

(Note: If your drive controller is not natively supported then you'll want to boot the Windows XP CD-Rom. Then *F6* very early and very important (at setup is inspecting your system) in the setup to prevent drive controller detection, and select S to specify additional drivers. Then later you'll be prompted to insert the manufacturer supplied Windows XP driver for your drive controller in drive "A")

Read the license agreement, and then press the F8 key to accept the terms of the license agreement and continue the installation.

When the Windows XP Professional Setup screen appears, all the existing partitions and the unpartitioned spaces are listed for each physical hard disk. Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L (or press ENTER, and then press L if it is the System partition) to confirm that you want to delete the partition. Repeat this step for each of the existing partitions When all the partitions are deleted press F3 to exit setup, (to avoid unexpected drive letter assignments with your new install) then restart the pc then when you get to this point in setup again select the unpartitioned space, and then press C to create a new partition and specify the size (if required). Windows will by default use all available space.

Be sure to apply SP2 or at least these two below to your new install before connecting to any network. Internet included. (sasser, msblast)
http://www.microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a&displaylang=en

http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx




--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"sadly full" wrote:
i have a Processor Brand Intel
Processor Class Pentium M
Processor Speed 1.60 GHz
Installed Memory 512 MB
Maximum Memory 2 GB
Memory Technology SDRAM
Cache Size 2 MB
Installed Video Memory 174 MB

Storage
Hard Drive Capacity 40 GB
Included Drives DVD-ROM, Hard Drive
DVD Read Speed 8 X

Display and Graphics
Display Size 15.4 in
Display Type TFT active matrix
Graphics Processor Intel GMA 900
Included Video Card Integrated Intel®
Resolution 1280 x 800 pixels
and i used to have a ibm that could be rebooted by pressing f7 and i could
reinstall all of my hardware

My question is can my computer be rebooted to re register my computer and
reinstal my programs ?reason is i baught a used computer and its all trashed
up and the disk claims its full

.



Relevant Pages

  • Re: XP reinstall - cannot delete c partition
    ... To do a clean install, boot the Windows XP install CD-Rom. ... Setup inspects your computer's hardware configuration and then begins to install the setup and driver files. ... When the Windows XP Professional screen appears, press ENTER to set up Windows XP Professional. ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ...
    (microsoft.public.windowsxp.basics)
  • Re: Cant get Win2000 running
    ... To do a clean install, either boot the Windows 2000 install CD-Rom or setup ... existing partition, If you press D to delete an existing partition, you must ...
    (microsoft.public.win2000.general)
  • Re: Software program not loading
    ... To do a clean install, either boot the Windows 2000 install CD-Rom or setup disks. ... Then *F6* very early and very important (at setup is inspecting your system) in the setup to prevent drive controller detection, and select S to specify additional drivers. ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ...
    (microsoft.public.win2000.general)
  • Re: new cpu/mobo/memory, old HD, Blue Death Screen when upgrade past SP2
    ... To do a clean install, either boot the Windows 2000 install CD-Rom or setup ... existing partition, If you press D to delete an existing partition, you must ...
    (microsoft.public.win2000.general)
  • Re: system restarts but does not save clea install
    ... To do a clean install, boot the Windows XP install CD-Rom. ... your computer's hardware configuration and then begins to install the setup ... existing partition, If you press D to delete an existing partition, you must ...
    (microsoft.public.windowsxp.general)