Re: computer getting slow for not the usual reasons

Tech-Archive recommends: Fix windows errors by optimizing your registry

my user manual does not say that. What page#?

Mine says:
....two inline memory modules (DIMM) sockets support 6 banks....to install
push..... into the DIMM socket. The DIMM Module can fit...."

"insert DIMM memory into DIMM socket..."

then:

"when the led is on do not install or remove SDRAM from socket"

all on page 12.

Thanks
paul

PS: I go out now and start another memory burn-in test.

"Gerry Cornell" <gcjc@xxxxxxxxxxxxxx> wrote in message
news:uqerI2GWHHA.488@xxxxxxxxxxxxxxxxxxxxxxx
Paul

Says in Manual regarding Memory

2 168-pin SDRAM DIMM sockets
Supports PC-100/PC-133 SDRAM (Auto)
Supports up to 1GB DRAM (Max)
Supports only 3.3V SDRAM DIMM
Supports 64bit DRAM integrity mode

--

Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulmars wrote:
I will follow those tests after my tests I got from Major geeks
are complete. Previously, I had done 3 memory tests, power supply
test, and a HDD test. Mojor Geeks I got some mainboard, cpu, and
memory tests. I have run several including mainboard and so far
no errors. Hmmm, I was told to use SDRam and that is what I hav in her.

Yea, I kno. I had already gotten that 2006 update last year. When
I removed my soundblaster and went back to the onboard sound. I
did such, because I needed to install a flash card and needed a
slot. So, out with the sound card. Only 3 bays on this board.




.

Relevant Pages

  • Re: SP 2 compatibility problem
    ... Then I proceeded to do another brand new clean install, ... > Roger. ... > I thought memory and it appears to be the memory slot in the motherboard. ... >> Me and a guy at the abit forum determined that dimm one is defective...and ...
    (microsoft.public.windowsxp.general)
  • Re: Via Apollo P4x266 motherboard and 1G PC2100 DDR 266 memory module
    ... DIMM with 6 memory banks. ... Memory Installation You can install PC1600/PC2100 DDR SDRAM modules on ...
    (comp.sys.ibm.pc.hardware.chips)
  • Re: Samsung & OCZ memory dont work together?
    ... I've got 4 memory sticks, ... If I install only the Samsung modules - no errors ... If I install only the OCZ modules - no errors ... SDRAM Frequency - 400MHz ...
    (microsoft.public.windowsxp.hardware)
  • Re: ES40 problems
    ... My memory is DIMM but ISTR that there were four memory boards in those boxes and you had to put matching DIMMs in corresponding sockets on each board; e.g. you put a 256MB DIMM in socket ... Be very sure that you install the same make and model DIMMs in each set of socket. ...
    (comp.os.vms)
  • Re: MEASURING RAM PERFORMANCE?
    ... I decided to increase the overal RAM and installed a 1GB DDR400 ... windows memory diagnostics - by itself and in combination with the ... modules that can be installed in the DIMM sockets on a mobo? ... Is it better to install RAM modules of the same size and from ...
    (microsoft.public.windowsxp.hardware)