Re: USB/Plug and Play malfunction

Sheisty wrote:
I will check this site out http://www.usbman.com/WinME%20USB%20Guide.htm as the other sites deal with usb Drive issues. My problem isn't a drive (my drives work certain peripherals/accessories dont" issue its more of a device driver issue.


"Elmo" wrote:

Sheisty wrote:
After recently installing Two new LiteOn IDE drives (1 DVDrom & 1 20x DVDrw +/-) usb/plug play has been quirky to say the least. My external Burner gets recognized when I power it on. One of my digital cameras is recognized as well as a usb flash drive. However, my cyberhome remote control is not recognized, one of my other digi cam's. When I plug them in I'm asked to allow Windows to search on the internet for the drivers. Previously before installing the drives all of they above devices worked without having to manually load drivers.

I have gone into device manager and uninstalled and reinstalled all the usb ports to no avail. Device managers recognizes all of them (6 in the rear + 2 in the front). I also deleted the infcache file in the inf folder and that didn't change anything either.

The devices that still work I tried them on all of the ports and they function appropriately. Some of the devices don't even come with drivers (ie the cyberhome universal remote). Any suggestions? Is there any way to completly reinstall/re-extract the files in the inf folder? If so will it help? Could I have damaged something when installing the drives? If so what should I look for?
Maybe one of these sites will help.

XP asks for USB drivers:
http://www.uwe-sieber.de/usbtrouble_e.html#xp_asks_for_drivers

USB Help sites:
http://www.usbman.com/WinME%20USB%20Guide.htm

General USB troubleshooting in Windows XP
http://support.microsoft.com/kb/310575

Troubleshooting for USB drives
http://www.uwe-sieber.de/usbtrouble_e.html

That's why I put the USB Drivers link first.

--
Joe =o)
.

Relevant Pages

  • Re: USB Drive not recognized - Driving me crazy!!!
    ... just a quick update, did not have much luck with the drivers on the floppy, ... XP has had a serious problem with USB 2.0 devices since day one and _nothing ... Both of these drives have worked fine on numerous ... boot the ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: USB Drive not recognized - Driving me crazy!!!
    ... You may need updated drivers. ... far is that my Intel USB controller 82801DB will not recognize any USB2 ... Both of these drives have worked fine on numerous other ... right track there as you below refer to another symptom, trying to boot the ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: OT - Kiwi Computer System Upgrade (Was: OT - Video Card Questions)
    ... of the USB drive is negligible. ... and it requires drivers to be downloaded and installed on ... you don't need additional drives specific to the make or model of ... However I've found that obsolete devices come in handy at the ...
    (rec.aviation.piloting)
  • Re: NEED HELP! New USB devices will no longer install
    ... methods fix more USB problems than physically hacking the registry. ... but all needed an OEM disk re-install of the drivers. ... drives, USB 80 Gig Disk drive, USB hubs. ... An Windows repair install helps then. ...
    (microsoft.public.windowsxp.hardware)
  • Re: USB Drive not recognized - Driving me crazy!!!
    ... All the Drivers you need should already be in WinXP. ... I have 4 USB 2.00 sockets on my PC and I run XP with SP2. ... for some reason the New Hardware Wizard will NOT install these ... Both of these drives have worked fine on numerous other ...
    (microsoft.public.windowsxp.help_and_support)