Re: Lost data on 320GB hard disk and corrupted data on 250gb hard

You might want to undertake a Google search for "data recovery programs".
There are many of these programs that purport to resurrect lost data. Many
of them are available as demo programs so you can determine if they're able
to identify such lost data.
Anna


"IJVelas" <IJVelas@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DDB6BED4-9F06-4BF4-8EF6-7636352A1471@xxxxxxxxxxxxxxxx
Thanks Anna, really apprecieate your tip. I might gonna try that after I
recover my lost files. Thank you very much. Do you know a good software
that
could restore my lost partitions?

Thank you.

"Anna" wrote:



IJVelas wrote:
My computer setup before reinstalling a fresh copy of WIndows XP
is
P4 2.8 Ghz on a Intel PERL Motherboard, 1GB RAM, 128MB Video,
Partitioned PATA 80GB Seagate (C: 40GB, D: 40GB) hard disk, SATA
250GB hard disk (E:), SATA 320GB hard disk (F:). Installed is
Windows XP SP2 with the latest updates by Microsoft. This setup
is
already a year old so I've decided to reinstall a fresh copy of
Windows XP. After successfully installing a new Windows XP SP2,
I
couldn't access my 320GB hard disk and everytime I boot up my
WIndows XP scandisk always run. I always cancel the scandisk
because I'm afraid that I might loose my valuable data if
scandisk
corrects the problems found by scandisk.

Windows XP tells me that my 320GB hard disk is not formatted. I
opened Computer Management to see the list of drives and found
out
that my 320GB hard disk is only detected as 130GB hard disk but
in
the BIOS it says 320GB hard disk. After doing some research on
the
net, I found out that Windows XP doesn't automatically support
large hard drives greater than 130GB (I think). I edited the
registry and added DWORD EnableLargeLba = 1 then rebooted my PC.
After the reboot, Windows XP still reports that my 250GB hard
disk
has problems. Opened Computer Management again and checked my
hard
drives. Computer Management now reports that my 320GB hard disk
has
130GB (healthy) and 170GB (unallocated).

I also lost some data and corrupted files on my 250GB hard disk.

I think the cause of this was Windows XP automatically
reconfigured
the partitions on my hard drive since it doesn't support large
hard
disks greater than 130GB.

Is it still possible to recover all my data on my 320gb hard disk
and 250gb hard disk drives? What should I do? I am sure that my
hard drives are working in good condition because I just bought
them a few months ago.


"Shenan Stanley" wrote:
Windows XP SP1 and later 'automatically' (out-of-the-box) supports
drives
larger than 137GB.
Your results from your research was incorrect or at least
incomplete.

As long as you installed Windows XP SP1 or SP2 initially (not
updated
it
to
SP2) - the support was there from the beginning.

You may be having trouble with the drivers for the controller?
Update those from the controller card or motherboard manufacturer?
(If built into the motherboard - the chipset drivers should cover
that.)

No one should have suspected a hard disk issue from the information
you
gave...

When you installed Windows XP - was it from a CD integrated with
SP1
or
SP2?

--
Shenan Stanley
MS-MVP


"IJVelas" <IJVelas@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DF88A5F7-91F6-4A52-888E-D6DA27979147@xxxxxxxxxxxxxxxx
http://support.microsoft.com/kb/303013

Thanks for correcting me, I reviewed the article again. But why is
it
that
my hard disks is not recognized correctly by Windows XP? What I did
was, I
installed a Windows XP (not SP1 and SP2) and reinstalled Windows XP
SP2.


"Anna" wrote:
IJVelas:
It would appear that when you originally installed XP (sans SP1 and/or
SP2)
the 137 GB disk capacity limitation was invoked, i.e., both your 250 &
320
GB HDDs would have been affected. So the system would not recognize
disk
space > 137 GB (approx.) under those circumstances. Presumably while
you
were using those two HDDs during the time SP1 and/or SP2 was *not*
installed
you could not have utilized any disk space > 137 GB (approx) so I
don't
understand how you could create any data on that space - data that you
infer
has been lost. Are you certain about this? Are you perhaps referring
to
data
on the 137 GB partition? And (in this connection) you mention only the
320
GB HDD as being affected by lost data. Not the 250 GB one although you
do
indicate there is a problem with lost files & corrupted data re that
HDD
but
it's not clear whether you're referring to the problem involving disk
capacity recognition here.

Now when you fresh installed XP w/SP2 to your 80 GB HDD (it *was* to
that
HDD, right?), the system would now recognize the full capacity of your
250
GB & 320 GB HDDs, however the additional disk space > 137 GB (approx)
would
have been designated as "unallocated" - disk space that you could
partition/format on both the 250 GB & 320 GB HDDs. Again, I'm assuming
the
250 GB HDD was similarly affected as the 320 GB, presuming that the
250
GB
HDD had been installed when you originally installed the XP OS without
SP1
or SP2.

The problems you mention re scannow and that "Windows XP tells me that
my
320GB hard disk is not formatted" indicate that something is amiss
with
your
system - probably having something to do with your fresh install of XP
or
something else. Assuming this is practical I wonder if at this point
it
would be advisable to undertake a new fresh install of XP - making
sure
that
*all* other HDDs and storage devices are disconnected from the system
during
this fresh install (presumably to your 80 GB HDD - I take it for one
reason
or another you prefer the OS to reside on that HDD rather than on one
of
your large-capacity HDDs. I don't know why - it wouldn't ordinarily be
my
choice but I take it you have your reasons). I'm assuming you would
have
no
difficulty re:installing your programs & applications following the
fresh
install.

Or in lieu of a new fresh install of the OS you could perform a Repair
install on that boot drive. Again, ensure that all HDDs & storage
devices
are disconnected from the system during that operation.

I'm not sure whether you'll be able to restore any lost data from your
two
SATA HDDs after this. There may be other problems affecting this
situation.
Anna



"IJVelas" <IJVelas@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:92F904A6-717A-4F4E-8E5F-091193EFF6D7@xxxxxxxxxxxxxxxx
On my previous setup, I just addedd the 2 hard disks and set them up
using
Computer Management that's why I didn't encounter some problems. But
when
I
did a fresh install, that's when I encountered problems with my hard
disks.

Regarding the scandisk, It only scans my 250GB hard disk so I'm sure
that
there is no problem with my latest install of Windows XP SP2. But just
in
case I will also try your advise.

The reason why I use the 80GB hard drive as my operating disk because
if
my
system gets damaged, I could easily reinstall a fresh copy of Windows
XP.
That's what I've been doing ever since. This problem happened because
I
was
not familiar that Windows XP does not handle large disk not until it
happened
to me. I hope you guys could help me find a way to restore the data in
my
hard drive.

Thanks.


I really don't have any further comments to make re your specific
problem(s)
and I would suggest you re:read my former comments together with the
questions I raised...

But I did want to comment on your statement that the reason you install
the
OS onto your 80 GB HDD (I assume it's a PATA drive) rather than on one of
your large-capacity (and presumably faster) SATA HDDs is "because if my
system gets damaged, I could easily reinstall a fresh copy of Windows XP.
That's what I've been doing ever since.". In my opinion, what you
*should*
be focused on is establishing & maintaining a comprehensive backup
program
that you will routinely use. In that vein you might consider employing a
disk imaging program or any other backup program that you're comfortable
with. And in so doing use your 80 GB HDD as the recipient of the backup
material (assuming it can handle the backed-up data) either as a internal
or
external HDD. And use one of your large-capacity SATA HDDs to install
the
OS together with your programs & applications. Your overall performance
should significantly improve.

I realize all this is for the future. First you have to solve your
present
problem(s). Good luck.
Anna





.

Relevant Pages

  • Re: One Hard drive for 2 computers
    ... > Windows XP, install it on a HDD and take the HDD with me. ... > WinXP, and another hundred dollar purchase, of which I ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: Clean install of Windows 2000 Professional
    ... Then, if the HDD ... like to place the OS on one partition and data on another. ... format and continue to install the OS. ... | Not clear for clean install of Windows 2000 Professional: ...
    (microsoft.public.win2000.general)
  • Re: Lost data on 320GB hard disk and corrupted data on 250gb hard
    ... Windows XP SP2 with the latest updates by Microsoft. ... Windows XP tells me that my 320GB hard disk is not formatted. ... GB HDD as being affected by lost data. ... would be advisable to undertake a new fresh install of XP - making sure ...
    (microsoft.public.windowsxp.general)
  • Re: New HDD Installation
    ... the Windows XP w/SP2. ... if it gets the new HDD in and the small out. ... Do I need the Windows Me disk? ... How about making a fresh install of the XP OS onto your SATA HDD? ...
    (microsoft.public.windowsxp.general)
  • Re: Clean install of Windows 2000 Professional
    ... Then, if the HDD ... like to place the OS on one partition and data on another. ... format and continue to install the OS. ... | Not clear for clean install of Windows 2000 Professional: ...
    (microsoft.public.win2000.general)