Re: Boot Disk Failure Needs CD to Boot Windows
- From: John John <audetweld@xxxxxxxxxxx>
- Date: Mon, 20 Nov 2006 11:56:28 -0400
Use the Disk Management tool and verify that the C: partition is marked as Active.
John
mfink@xxxxxxxxxxxxxx wrote:
Ok, I have looked at a lot of posts and have seen a similar problem,
but no fixes helped me yet. I installed a brand new hard drive and
installed Windows XP Pro. My BIOS boot settings are as follows:
Floppy
CD-ROM
HDDO
When I start the computer, it seems to take a lot of time recognizing
IDE devices and then pauses once it has recognized Primary Master,
Slave... etc... then it tries to boot and I get thsi message:
Verifying DMI Pool Data..
BOOT FROM ATAPI CD-ROM:
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER.
As long as the XP CD is in the drive Windows will boot fine. I do not
press enter, therefore I am not really booting from the CD. If I Boot
from CD then the WIndows installer starts. If I don't have the CD I
cannot boot.
Okay, what I've tried so far.
I've changed by boot sequences to all configurations, doesn't seem to
matter.
I ran Systam Console and did the following:
CopyD:\i386\NTLDR C:
CopyD:\i386\NTDETECT.COM C:
Files copied Fine... (This seemed to work for another post with the
same problem)
Did not work for me.....
Any more suggestions????
.
- Follow-Ups:
- Re: Boot Disk Failure Needs CD to Boot Windows
- From: Anna
- Re: Boot Disk Failure Needs CD to Boot Windows
- From: mfink
- Re: Boot Disk Failure Needs CD to Boot Windows
- References:
- Boot Disk Failure Needs CD to Boot Windows
- From: mfink
- Boot Disk Failure Needs CD to Boot Windows
- Prev by Date: Re: Windows XP Home won't shutdown
- Next by Date: Re: application error
- Previous by thread: Boot Disk Failure Needs CD to Boot Windows
- Next by thread: Re: Boot Disk Failure Needs CD to Boot Windows
- Index(es):
Relevant Pages
|
|