Re: 2 Network Connections - How to Force Internet Explorer to use a Specific one

"allanc" <allan.for.g.groups@xxxxxxxxx> wrote in
news:1163698790.424077.215920@xxxxxxxxxxxxxxxxxxxxxxxxxxxx:

Their server is Small Business Server and the current subnet is
10.0.0.0.
Does not mean that none of the workstations will be able to
communicate with LinkSys router on 192.168?


Technically, no, they will not be able to communicate with a device on a
different subnet.

The Linksys would need to be set on a 10. IP as well. 10.0.0.0 is a giant
subnet to use if that's not ckoked down smaller.

(Of course, I completely forgot the context of this thread. When you
post, you should add your replies UNDER what specific
questions/statements you are replying to. And <SNIP> parts that are not
relevant to the new questions/statements. Top-posting as you have done,
just makes it a lot harder to follow the discussion. Especially for
_those_ ex-hippies in here.)




On Oct 31, 10:33 pm, DanS <t.h.i.s.n.t.h....@xxxxxxxxxxxxxxxxxxxxx>
wrote:
"allanc" <allan.for.g.gro...@xxxxxxxxx> wrote
innews:1162349148.384417.225960@xxxxxxxxxxxxxxxxxxxxxxxxxxxx:





On Oct 31, 5:47 pm, DanS <t.h.i.s.n.t.h....@xxxxxxxxxxxxxxxxxxxxx>
wrote:
"allanc" <allan.for.g.gro...@xxxxxxxxx> wrote
innews:1162333073.020282.153490@xxxxxxxxxxxxxxxxxxxxxxxxxxx:

Here is my scenario:

We have a network of 10 computers and a server all connected to
a switch using ethernet.
The current connection to the Internet is 64k ISDN.
Cable modem and DSL are not available at this
location.64K....ouch!

I found a reasonably priced 'wireless' network provider and a
signal is available.
I would like to connect the output of this modem to the input of
a wireless router.
The next step would be to add USB based wireless adapters to
some of the workstations so that they can obtain faster access
to the Internet. In other words, 10 computers and the servers
would be one network and maybe 6 of the 10 would be wireless on
another. These wireless connections would only need to share the
Internet connection but not printers or other resources within
their network.

Is it possible to configure Internet Explorer on just these 6
computers to use the wireless connection (and not the wired) to
access the Internet. The other 4 computers would still use the
wired connection thru the switch? How would I accomplish this?I
don't know the purpose of having the wireless on some
workstations.
Wireless is ALWAYS slower than wired, especially when you have
more than one wireless client on an access point. Why spend the
money on the USB devices ?

How is the ISDN line connected now ? To the switch ? With a router
? These servers, are they domain controller, or just file servers
with mapped drives ?

The short answer (not knowing your full network configuration)is
all you would need to do is connect the new WISP device to the
switch, and then change the default gateway on the machines you
want to use the WISP to the IP of the WISP device. It can be on
the same network as everything else.

It's all in the default gateway setting.

The output of the ISDN modem is the input to a hub. One of outputs
of the hub is input to a PC (required because of an applcation) and
the other is input to a SBS server (domain controller). The other
NIC in the server is input to a 24 port switch.
The reason for the USB wireless is because I did not think that the
switch could have 2 input Internet connections at dissimiliar
speeds (64k ISDN and 3 Mb wireless).I'm not familiar with ISDN at
all. ISDN never went over the way they
thought it was going to.

Now, from what I gather from your description, the Domain Controller
is between the 'rest' of the network and the ISDN access device ?

ISDN ---> HUB ---> Server ---> 24 Port Switch

Then the hub has another PC on it, and the rest of the PC's are
connected to the switch. The server is configured to do some type of
NAT ? The PC's have the server IP as it's default gateway/DNS ? Is
the DC doing firewalling/access control and/or proxy server as well ?

That is the biggest issue. If the DC is providing those functions,
then it is more difficult to do the setup.

Yes, you can have more than one internet connection available on a
switch. You can have 4 DSL/Cable modems w/4 routers. You can uplink
the LAN side on each router into the same switch. As long as the LAN
interface on each of those 4 routers is on the same subnet, and not
identical, like 192.168.1.1, .2, .3, .4, any PC on that subnet hooked
into that switch can use any of those connections. All it would take
is to change the default gateway to the specific router/cable modem
you wanted to use.

With your situation it really depens on what you are/want to do with
the DC. Setting the DC aside, the WISP device's router's LAN port can
be set to the same subnet as the rest of the LAN, and uplinked into
the switch. Then you can just change the gateway of whatever PC's to
the IP of the WISP router. But doing it that way would bypass any
control your DC has on the network. Of course, I just realized that
is what you were looking at doing anyway with the wireless cards.

Is the wireless Clearwire ?

Regards,

DanS- Hide quoted text -- Show quoted text -


.

Relevant Pages

  • Re: TV service query ? ? ?
    ... a wireless router. ... a router with extended coverage. ... cable and a wireless connection that you can not see. ... is to have users downloading r/t video, large video files, or other ...
    (alt.home.repair)
  • Re: Xbox 360 and Media Center Connectivity Problems
    ... between the media center pc and the xbox 360.... ... will have to try and research a wireless router/access point that will not ... deter the extender and media center from holding a connection... ... via the router, with the MCE ...
    (microsoft.public.windows.mediacenter)
  • Re: My Network Places
    ... What you want is to set your router's IP, and thus your router's DHCP server, to use a subnet that is different than the one being used by your provider's router. ... I'm not sure why you are using a bridge and separate wireless router rather than merely wirelessly connecting direct to your "provider's" router, but there is a definite plus: because you have your own wireless router, you can effectively isolate yourself from the other users on your provider's router. ... As soon as you click the "Save Settings" button, you will lose your connection, because your computer will now be on a different subnet. ... It does not provide any security and it may cause problems, ...
    (microsoft.public.windowsxp.network_web)
  • Re: Connect a Wireless Router to my SBS Network
    ... 5-port Switch is outside my firewall. ... Ethernet adapter Local Area Connection: ... If the DSL mode-router is in bridge mode, you may want to put the Airlink ... wireless resolves DNS requests? ...
    (microsoft.public.windows.server.sbs)
  • Re: wireless download speed
    ... Also, if this was done using a wireless connection, you can get a very ... In the case of a cable modem, ... and router rules can slow the router down. ...
    (alt.internet.wireless)