Re: Transferring an existing WindowsXP system to another PC
- From: Bruce Chambers <bchambers@xxxxxxxxxxxx>
- Date: Thu, 09 Nov 2006 08:27:00 -0700
Leftred wrote:
Using WindowsXP Home SP2.
I transferred a Hard Drive which contained an existing WindowsXP system from my old PC into a new upgraded PC and tried to boot the system.
I thought that it would at least boot and open Windows with a default driver for the video card and that I could then load the correct drivers for the motherboard and other devices. Or that Windows would find most of the devices and have drivers available.
The result was that the Bios showed normal reports, but the system then stopped with a small cursor showing in the top left corner of the monitor screen.
Should I have been able to get the system to boot? If not, what should I have done?
Any help would be appreciated.
Ian
Normally, and assuming a retail license (many factory-installed OEM installations are BIOS-locked to a specific chipset and therefore are *not* transferable to a new motherboard - check yours before starting), unless the new motherboard is virtually identical (same chipset, same IDE controllers, same BIOS version, etc.) to the one on which the WinXP installation was originally performed, you'll need to perform a repair (a.k.a. in-place upgrade) installation, at the very least:
How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341
Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html
The "why" is quite simple, really, and has nothing to do with licensing issues, per se; it's a purely technical matter, at this point. You've pulled the proverbial hardware rug out from under the OS. (If you don't like -- or get -- the rug analogy, think of it as picking up a Cape Cod style home and then setting it down onto a Ranch style foundation. It just isn't going to fit.) WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. On installation it "tailors" itself to the specific hardware found. This is one of the reasons that the entire WinNT/2K/XP OS family is so much more stable than the Win9x group.
As always when undertaking such a significant change, back up any important data before starting.
This will also probably require re-activation, unless you have a Volume Licensed version of WinXP Pro installed. If it's been more than 120 days since you last activated that specific Product Key, you'll most likely be able to activate via the Internet without problem. If it's been less, you might have to make a 5 minute phone call.
--
Bruce Chambers
Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html
They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. -Benjamin Franklin
Many people would rather die than think; in fact, most do. -Bertrand Russell
.
- References:
- Transferring an existing WindowsXP system to another PC
- From: Leftred
- Transferring an existing WindowsXP system to another PC
- Prev by Date: Re: What is the MFT?
- Next by Date: Re: how to find which version is installed
- Previous by thread: Re: Transferring an existing WindowsXP system to another PC
- Next by thread: Re: Transferring an existing WindowsXP system to another PC
- Index(es):
Relevant Pages
|
