USB 2.0 is both a hardware and software driver thing. You need the
hardware, then the driver to make it work. As Galen pointed out, don't
expect full USB 2.0 speed with a PCMCIA addon.
You need a USB 2.0 (enhanced) controller first.
--
Jonny
<ThompsonTOT@xxxxxxxxx> wrote in message news:1162270528.296649.321070@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Is it possible to convert the low speed USB 1.1 port on my Dinosaur
laptop (purchased 2001) to a high speed USB 2.0 port? If so, how? Do I
need to buy new hardware, or is this purely a driver fix.
I check my device manager and I do not have "Enhanced" USB devices.
[opensuse] openSUSE 10.3 not detecting SATA HD ... the sata_sis driver.... I've tried turning off ACPI in bios and acpi=off which ... openSUSE 10.2 and all my hardware is working fine. ... info.product = 'USB Raw Device Access'... (SuSE)
Re: Supporting a PS/2 Keyboard ... I don't have any USB to PS2 ... The NOP keyboard... One alternative then is to get the hardware guy to put a PS/2 to USB ... I assume that CE's USB HID driver supports a USB ... (microsoft.public.windowsce.platbuilder)
Re: USB 2.0 - All devices dont initiate ... > I have an Asus P4S800 MB and several USB 2.0 devices (like the ...USB1 port hardware at startup -- and thus the devices don't properly ... While the USB2 driver files were properly updated by the Service Pack, ... The first step is to ensure you are using the latest motherboard BIOS.... (microsoft.public.windowsxp.general)
Re: Accelent USB drivers; modify and compile for iPaq 4155 ... There is a driver on the Ipaq that already handles that port. ...directly control USB hardware is because that's the driver's job. ... (microsoft.public.windowsce.platbuilder)
Re: Help! Printer Problem ... Plug and play, immediately identified the printer, loaded the driver,...install it on another system to see if it ...USB or Parallel? ... HP installs some devices in Device Manager seemingly ... (misc.news.internet.discuss)
