Re: Routing problem

I think you need 2 VPNs, one each way.

So you need you home router to work as a pptp client to the linux box too.

Pierrot


acon wrote:
I need to conect my home network with mi office network.
At office, i have a linux machine acting as a router.
At home, i have a ADSL router and 2 XPpro machines.
The network at the office is not conected to internet, but to a VPN
provided by the ISP that connects all sites in the same subnet.
This means i cant map nat ports to my server, so y cant use IPSEC.
The only way is PPTP.
I have succefuly conected the Linux server (pptp client) to my home
router (pptp server) and the link is working fine.


.

Relevant Pages

  • Re: cisco and linux VPN
    ... we have 3 vpns established on an 2600 router that is located at our ISP ... and on the linux there will be a static route so that any traffic from ... cisco, working on freeswan now, someone mentioned spit-tunneling to me ...
    (RedHat)
  • Re: Confusing gateway/FW project - need help bad!
    ... ...all boxes have internet as well as intranet access. ... address" setting in the router enabled but disable DHCP on the LAN. ... I was going to change it over to Linux eventually anyhow, ... I have eth1 removed from the box as I figured I'd get eth0 ...
    (comp.os.linux.networking)
  • Re: Networking problems (again) tough one
    ... The problem *only* occurs on my Linux machines. ... DNS numbers, ... all systems start working again whether setup manually or with DHCP. ... If theu are shoing good, and yet things dont work, you may have a misconfigured router. ...
    (comp.os.linux.setup)
  • Re: uCLinux on Samsung S3C4510B (ARM7TDMI) based wireless router
    ... serial port or printer port, ... linux or further. ... > router, access point and print server, all at the same time, preferably ... > and openap-ng) options as well as uCLinux. ...
    (comp.os.linux.embedded)
  • Re: 56k dial up on laptop 802.11G ?
    ... >>> Linux firewall is not a firewall... ... NAT router? ... traffic can be set like it can be set for packet filtering like they can be ...
    (alt.internet.wireless)