Re: OEM Windows XP Pro thru VMWare requires activation ???

Ron, I think that you are right: The "system" seen by Windows XP Pro
running in my VMWare session is significantly different from the one
seen by Windows XP Pro when it was installed standalone.

I already said that at least the size of memory seen by the two
different XPs is different (256MB vs. 1GB) but actually there are many
more differences, the most noticeable one is the BIOS manufacturer and
version.

Since you said that my "OEM version is BIOS locked to the motherboard
BIOS used by the laptop manufacturer", this means that I have to use
the product key on the bottom of my laptop in order to activate WXP -
right?

Thanks,
Alex


Ron Martell wrote:
xp_newbie@xxxxxxxxx wrote:

I recently purchased a new laptop with Windows XP Professional
pre-installed (came with nice and shiny COA sticker affixed to the
bottom). Unfortunately, it came pre-loaded with promotionware and other
bloatware that I really don't want on my computer, so I used the
excellent instructions provided on the following web site:

http://www.4saad.com/WhatsNew/Fresh_XP_Install

to create a clean-install CD and use it to perform a clean install.
According to that web site I should use the original key on the hard
drive, not the one on the sticker. I did just that (when prompted for a
key) and all went well, not asking for activation (it is OEM
pre-activated after all).

Then I realized that what I really want to do is use Windows XP for web
access only (using things that require the unsafe ActiveX, Internet
Explorer, Macromedia Flash and other entertainment oriented
technologies) and use Linux for productive work -- using Linux to host
VMWare (because Linux is more robust and runs VMWare faster than
Windows anyway).

I did just that: Wiped out the hard disk (again), then installed Linux,
then installed VMWare and then installed Windows XP (single copy!)
inside a VMWare virtual machine.

All went well - but now Windows XP asks for activation (which is
strange because the same exact OEM CD used for installing it on same
exact hardware first time did not ask for activation).

What is the explanation for this inconsistent behavior of Windows?

Is it possible that the OEM CD is simply tied to the exact original
hardware configuration (un-virtualized) and that by introducing a
slightly different hardware config (256MB RAM instead of 1GB phsically
installed on the laptop), the OEM pre-activation no longer works?

Thanks,
Alex

Because VMWare isolates your virtual machine from the actual physical
hardware in your computer. Look at the hardware components listed in
Device Manager for your virtual install and compare these to the ones
actually installed in the machine.

The critical component in your instance is probably the motherboard
BIOS. If the VM install is not getting the proper motherboard BIOS
signature (the one from the actual laptop manufacturer) then you will
have the type of problems you are encountering.

Your OEM version is BIOS locked to the motherboard BIOS used by the
laptop manufacturer.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."

.

Relevant Pages

  • Re: Update the BIOS
    ... Best to blow it all away and go a the clean install. ... Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your drive controller in drive "A") ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ... mb or hardware manufacturer's web site for the latest bios and or Windows 2000 drivers for your devices. ...
    (microsoft.public.win2000.general)
  • Re: Xp x64 not Installing - Stuck on Starting windows
    ... like USB, PARALLEL, SERIAL, no overclocking, extra hard drives. ... huzzah) Ive tried installing windows XP non-x64, ... I install Mandrake version 9.2. ... So, Ive been working on trying to update the bios, but i dont have a floppy ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Floppy stopped working: Could this mean a boot sector virus?
    ... into windows xp. ... if you are careful you can install it ... the default boot sequence to move the floppy to the front of the list and ... > Otherwise I was wondering whether there was a way of reinstalling the BIOS ...
    (alt.sys.pc-clone.dell)
  • Re: HP Pavillion a265c takes 5 minutes from post to desktop
    ... Its on the Primary chain. ... correctly setting up the BIOS options. ... else on the system except windows. ... After XP installed I did allow it to install all the Windows updates. ...
    (microsoft.public.windowsxp.general)
  • Re: How could Install Solaris V10 into my PC with Windows XP Professional
    ... Since Solaris can mount NTFS ... And Windows can't mount ufs or zfs at all. ... install Solaris-10 or better yet Open Solaris and then install VMware ...
    (comp.unix.solaris)