"Turn Off Computer" fails to turn off power
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
I've had this (Asus) system running with XP SP1 for quite a while. A
fresh install of SP2 fails to turn off power when Start->Turn off
Computer is selected.
No flags under Dev Mgr->View->Show Hidden. I don't have any obvious
options under Power Management.
Another SP2 problem. Any way to fix this?
.
Relevant Pages
- Re: After sleep needs me to press the power button to restart!
... I force installed SP1 by downloading the whole sp1 package, but this was something sony advised on the very page I found the drivers..... ... While in the BIOS make sure the power options are set properly for what you want to do. ... Did your machine go to sleep first with a switch to hibernation after a period of time before? ... (microsoft.public.windows.vista.general) - Power icon no longer appears in notification area
... If I go to Taskbar and ... Start Menu Properties, Notification Area tab, the Power check box is grayed ... This may have happened as a result of installing SP1, ... (microsoft.public.windows.vista.installation_setup) - Re: computer will not turn on
... > The computer doesn't even try to start and cannot boot from ... >>Can you pull out the power cable and wait 15 minutes, ... >>Is there any way to boot from a floppy disk into DOS just ... > to get into the system but trying a fresh install. ... (microsoft.public.win2000.general) - Re: After sleep needs me to press the power button to restart!
... If you won't update the BIOS, at least check to see if there is a newer one, especially if it is shortly after SP1 was released. ... check the change log to see if any changes were related to power related issues. ... I have seen them, on the sony site, I only updated the sound card driver because that was the only one I was sure that wasn't compatible with sp1 .... ... Did your machine go to sleep first with a switch to hibernation after a period of time before? ... (microsoft.public.windows.vista.general) - Re: Editing DVR-MS?
... >PowerDirector specifically in my case) to be able to read the DVR-MS files ... >recorded by media center" to find their article on the SP1 fix. ... SP1 so Power Director would work just fine. ... (microsoft.public.windows.mediacenter) |
|