Re: Cannot Log-off Admin Permanently

You're welcome. Thanks for letting us know your problem is
fixed.

Nepatsfan

8F2F76EF-F40F-42CD-B631-42AB9CFC2841@xxxxxxxxxxxxx,
Steve <Steve@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Thanks it worked!!

"Nepatsfan" wrote:

Sorry about that, I left out a step. After you remove the
check mark you need to hit the Apply button. Here's the
corrected procedure:

Go to Start -> Run and enter the following in the Open box.

control userpasswords2

Click OK.
Put a check mark in the box next to "Users must enter a
user name and password to use this computer".
In the "Users for this computer" box, click on your user
account so it is highlighted.
Go back and remove the check mark from the box next to
"Users must enter...".
Hit the Apply button.
The "Automatically Log On" box should pop up.
Make sure your user account is entered in the User name box.
If your account has a password, enter it twice. If your
account does not have a password, leave the boxes blank.
Click OK twice.
Reboot to see if you get the desired results.

Nepatsfan


02498F69-BFD1-459C-92AC-756F969BD371@xxxxxxxxxxxxx,
Steve <Steve@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Thanks for your suggestions, but I still have the following
problems:

1) For the first approach, the "Automatically Log On" box
failed to pop up after I removed the check mark from the
box next to "Users must enter...".

2) In the second case, I could not install TweakUI.
Instead, this error message was received, "The procedure
entry point GETDIIDirectoryW could not be located in the
dynamic link library KERNEL32.dll."

"Nepatsfan" wrote:

E3DB82E3-68E5-44B2-AA70-AA2FC43CC2C5@xxxxxxxxxxxxx,
Steve <Steve@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Several times I have logged-off the default Administrator
and switch to my own User name. However, at Startup the
PC always revert to the default Administator.
Please how do I permanently log-off the default
Administrator?

Thanks for the help.

Go to Start -> Run and enter the following in the Open
box.

control userpasswords2

Click OK.
Put a check mark in the box next to "Users must enter a
user name and password to use this computer".
In the "Users for this computer" box, click on your user
account so it is highlighted.
Go back and remove the check mark from the box next to
"Users must enter...".
The "Automatically Log On" box should pop up.
Make sure your user account is entered in the User name
box. If your account has a password, enter it twice. If
your account does not have a password, leave the boxes
blank. Click OK twice.
Reboot to see if you get the desired results.

An alternative approach is to download and install TweakUI
from Microsoft:

TweakUI
http://download.microsoft.com/download/f/c/a/fca6767b-9ed9-45a6-b352-839afb2a2679/TweakUiPowertoySetup.exe

After installing TweakUI, go to Start -> Powertoys for
Windows XP and run the program.
Click on the + sign next to Logon.
Click on Autologon.
In the right hand pane, check "Logon
automatically at startup".
Enter your user name and password.
Click OK.
Reboot.

Good luck

Nepatsfan



.