Switching USB port for default printer
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
I have a USB printer setup as a local default printer with printer port USB001. Sometimes, when I
unplug the USB cable and plug it back in, Windows will install a copy of the printer on port USB002.
It is inconvenient to have to switch it to become the default printer.
How do I make the default printer work regardless of the USB port assigned?
.
Relevant Pages
- Re: using usb port 2
... Plug and Play needs to delete the port, ... >the device manager and remove "usb printing support". ... > If the printer still doesn't work then I would try swapping usb cables, ...
(microsoft.public.win2000.printing) - usb_insert_transfer panic with if_zyd
... When I use my ZyXEL G-220 Wireless USB Stick with the if_zyd driver, ... <ACPI PCI bus> on pcib0 ... device problem, disabling port 1 ... <Ethernet over FireWire> on firewire0 ...
(freebsd-current) - Re: How can I control a PC from a USB cable; think KVM to USB?
... single port KVM's that work over IP that plug into the ... monitor/mouse/keyboard ports from a tiny box that has a ether port on it. ... and take control that way. ... IOGear makes some reasonably priced KVM switches, both USB and PS2. ...
(microsoft.public.windows.server.sbs) - 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
... usb modules for console, usb keyboard, network and starting a shell. ... ACPI: PM-Timer IO Port: 0x808 ... PCI: PCI BIOS revision 2.10 entry at 0xfb768, ... usbcore: registered new driver hub ...
(Linux-Kernel) - usb does not work on vias smp mainboard
... I installed kernel 2.4.21 on an via's mainboard, it seems that the usb ... number of MP IRQ sources: ... PCI Interrupt Link ... Port indicators are not supported ...
(Linux-Kernel) |
|
