Re: Cloning PCs -- how access Server 2003 from boot CD?

"Pegasus \(MVP\)" <I.can@xxxxxxx> wrote:

...
I've yet to find a boot CD that will let me access a Server 2003 share.
The issue is specific to 2003. 2000 is no problem.

/kenw

What do need a boot CD for? Presumably the laptop is functional
(even though you never made this clear), and presumably it can
reach the server via a network connection (which you did not make
clear either). If these assumptions are correct then you can boot
the laptop into Windows and store your image in the server straight
away!

If the above assumptions are incorrect then please provide
full details about your current configuration.

The source PC is running normal, fully functional Windows XP.

The objective to get an exact image of the source hard drive with the
installed OS in ready-to-boot condition (i.e., not the kind of thing you'd
get if you just turned off the power while it was running). The state of a
running OS in partly on disk and partly in RAM, and you can't copy RAM
contents except via Hibernate. So you need to copy the hard drive with the
OS shut down.

Which means booting from another device -- i.e., the boot CD.

The target PC may or may not have anything previously installed on the hard
drive. Restoring the previously created image to it, again, means the hard
drive you're overwriting -- particularly the partition from which Windows
is currently running -- can't be in use. Thus the boot CD.

The kicker in all of this, of course, is that I want to store my images on
the server, which runs Server 2003. I can't connect to a Server 2003 share
when booting from a CD. So I either need to find a boot CD that can
connect to Server 2003 shares, or use some other method to access the
images on that server without booting from the drive I'm overwriting.

I've looked at products that appear to make useable-but-not-exact images of
the running OS. They strike me as more for backup than cloning.

/kenw
.

Relevant Pages

  • Re: Booting over Network
    ... Mike Curtis wrote: ... He seems to be talking about booting from a server i.e. ... Create a boot directory called!ShareBoot on the shared disc. ...
    (comp.sys.acorn.networking)
  • Re: DCPROMO seems to be stuck - Windows Server 2008 R2
    ... Since I waited over an hour for it to boot after it took over an hour to run dcpromo, I've gone a head and tried booting it in safe mode with networking - no luck, safe mode only - no luck and finally directory services repair - no luck. ... "boe" wrote in message ... I have a 2008 R2 server - just formatted from scratch, applied the 8 or so patches from Windows update. ...
    (microsoft.public.windows.server.active_directory)
  • Re: Server Hangs on "Applying Computer Settings"
    ... Have you tried booting with the network cable pulled? ... On the last>re-boot the server will hand on the "Applying Computer Settings" of the>re-boot process. ... The computer will boot with no problem into Safe Mode with>network support. ...
    (microsoft.public.windows.server.general)
  • Re: How to reset admin password in Active Dir. Domain Controller win20
    ... After booting up we tried to login using the "Administrator" profile, ... We try again to restart the server and after booting there's an error ... Hiren's boot cd unfortunately we are unsucessfull. ... Instead of the website you're using, try using OEx (Outlook Express ...
    (microsoft.public.windows.server.active_directory)
  • Re: automatic dump and restore over
    ... Do you think it is at all possible to do this update without rebooting? ... The laptop is running DHCP, ... >> All servers are set to boot using PXE and once I reboot it the server boots an image from the laptop containing a picobsd dist with a modified startup script. ...
    (freebsd-questions)
Loading