Re: Kingwin KF-83 or KF-91

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


"Anna" wrote:
The one we've been working with is the Athena MR-125 (comes in beige & black) - sells for $24.99 (incl. shipping) at Newegg - see http://www.newegg.com/Product/Product.asp?Item=N82E16817123301

It's an all-plastic model with an 80 mm (very large) fan at the bottom of the rack. It has a simple ON-OFF button (we leave it always in the ON position) and a lever that's simply released by a push button so that a slight outward tug on the open lever causes the tray containing the HD to be disconnected from the machine. A simple push of the lever inward and the tray is reinserted and the connection made. Notice there's no keylock mechanism and that's what we've been looking for. This mobile rack does contain both the Molex power connector as well as the 15-pin SATA power connector.


Here's the Athena website: http://www.athenapower.com/
It seems they also make aluminum models and models that incorporate
LCD temperature displays. Their tray bottom-mounted "turbo fan" also
appears to be identical in design to that of Kingwin - a plus as far as I'm
concerned. The pricing, though, may be higher than that for Kingwin.

*TimDaniels*

.

Relevant Pages

  • Re: Kingwin KF-83 or KF-91
    ... if anyone has used the Kingwin KF-83 and the Kingwin KF-91. ... The single fan is built into the bottom of the tray, ... The small fan is at the rear of the rack. ...
    (microsoft.public.windowsxp.general)
  • Re: Building a Stir Plate for Yeast Propagation (With Step-by-Step Photos and Video)
    ... you might have problems keeping thestirbar steady with the fan so ... vortex to hit the bottom with the yeast in it. ... I'm using a 2 in stir bar and a 2000 ml ehrlemeyer flask. ... space the fan (and magnet) from the bottom of the flask. ...
    (rec.crafts.brewing)
  • Re: Airflow direction in rack-mount cases
    ... drew air in at the back, and blew it out the front. ... be some benefit to the equipment? ... I've seen a lot of rack mount equipment, and the back to front airflow is ... Bottom to top may be installed with 1 or 2U high angled panels between ...
    (sci.electronics.design)
  • Re: Attn Mr Wright
    ... had added a fan. ... longer blowing into the rack. ... It isn't shown in the photos but the ... appear to have omitted this essential formality. ...
    (uk.tech.digital-tv)
  • Re: Sunblade 2K - Audio Issue
    ... the bottom slot in the Sun Blade, you could possibly gain an extra slot. ... Many years ago I came to the conclusion the fan on an old SunPCi card ... To do this with the XVR-1200 requires that you cut the dual PCI card ...
    (comp.sys.sun.hardware)