Re: PC wont start after BIOS change!

You are now, obviously, trying to run your CPU, RAM etc. "out of spec". If
you don't know what you are doing the result may be just what you are
experiencing.

Do as others have said and remove your M/B battery for about 1/2 hour. Then
put it back in and boot. Your computer will be running at it default
settings.

--


Regards,

Richard Urban
Microsoft MVP Windows Shell/User

Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!

<zeunerts77@xxxxxxxx> wrote in message
news:1140714648.132719.298480@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

need some help with my computer. After changing my CPU settings in my
BIOS, and trying to reboot the computer, all I got was a black screen.
The power is working, apparently, but nothing happens on the screen.
What to do???
Thanks.

/Z.



.

Relevant Pages

  • Re: DDR MHZ
    ... explains the ratching down of your RAM to PC2700, it keeps the CPU and RAM ... components remain "in spec", i.e., NOT overclocked. ... ANYTHING is suspect at this point. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: My processor wont run at the right speed.
    ... just go ur BIOS and check you CPU settings you have to over clock it ... youre self or there shoule be some auto mode for ur CPU so that it can adjust ... And if you do overclock that far, ...
    (microsoft.public.windowsxp.general)
  • Re: Windows XP
    ... What's the spec of your PC, i.e. CPU and RAM - XP needs a bit more ... 128MB SD Ram ... 512KB cache on CPU ...
    (uk.people.silversurfers)
  • Re: No interrup raised: PCMCIA/CF on top of TI1520 Card Bus
    ... > As you pointed out that I need to set registers in CPU. ... can look at the CPU settings. ... Prev by Date: ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Would a 2nd processor really be a waste of time???? help
    ... > buy another processor and more ram, however this is what one supplier ... > Your server has only 1 processor. ... installation including changing the bios settings and installing the smp ... The second cpu will probably help ...somewhat. ...
    (comp.unix.sco.misc)
Quantcast