Re: Slow frame rate after system restore

Thanks for the advice Gerry
I never saw those logs before.

These are the errors and warnings.
I can see the one relating to the internal clock time, and I sorted that
manually.
The slow frame rate is another matter. I don't know if these logs relate
specifically to that issue?

Your help is appreciated

Regards

David





Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 34
Date: 1/21/2006
Time: 12:18:23 AM
User: N/A
Computer: DAVID-5BDAB6674
Description:
The time service has detected that the system time needs to be changed by
+57622 seconds. The time service will not change the system time by more
than +54000 seconds. Verify that your time and time zone are correct, and
that the time source time.windows.com
(ntp.m|0x1|84.71.149.188:123->207.46.130.100:123) is working properly.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.



Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 1/21/2006
Time: 9:55:08 PM
User: N/A
Computer: DAVID-5BDAB6674
Description:
The crd service failed to start due to the following error:
The service did not respond to the start or control request in a timely
fashion.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.



Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7009
Date: 1/21/2006
Time: 9:55:08 PM
User: N/A
Computer: DAVID-5BDAB6674
Description:
Timeout (30000 milliseconds) waiting for the crd service to connect.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.




Event Type: Warning
Event Source: Userenv
Event Category: None
Event ID: 1517
Date: 1/21/2006
Time: 2:50:31 PM
User: NT AUTHORITY\SYSTEM
Computer: DAVID-5BDAB6674
Description:
Windows saved user DAVID-5BDAB6674\David Jaundrell registry while an
application or service was still using the registry during log off. The
memory used by the user's registry has not been freed. The registry will be
unloaded when it is no longer in use.

This is often caused by services running as a user account, try configuring
the services to run in either the LocalService or NetworkService account.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.



Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 63
Date: 1/21/2006
Time: 8:49:06 PM
User: NT AUTHORITY\SYSTEM
Computer: DAVID-5BDAB6674
Description:
A provider, HiPerfCooker_v1, has been registered in the WMI namespace,
Root\WMI, to use the LocalSystem account. This account is privileged and
the provider may cause a security violation if it does not correctly
impersonate user requests.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Type: Warning
Event Source: Cdrom
Event Category: None
Event ID: 51
Date: 1/21/2006
Time: 9:52:19 PM
User: N/A
Computer: DAVID-5BDAB6674
Description:
An error was detected on device \Device\CdRom1 during a paging operation.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 03 01 68 00 01 00 b8 00 ..h...¸.
0008: 00 00 00 00 33 00 04 80 ....3..?
0010: 2d 01 00 00 13 00 00 c0 -......À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 85 71 00 00 00 00 ..?q....
0028: a8 65 03 00 00 00 00 00 ¨e......
0030: ff ff ff ff 01 00 00 00 ÿÿÿÿ....
0038: 40 00 00 c4 02 00 01 00 @..Ä....
0040: ff 20 0a 12 4c 02 00 40 ÿ ..L..@
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 00 00 20 87 18 82 .... ?.?
0058: 00 00 00 00 08 d0 10 82 .....Ð.?
0060: 02 00 00 00 a0 30 0e 00 .... 0..
0068: 28 00 00 0e 30 a0 00 00 (...0 ..
0070: 02 00 00 00 00 00 00 00 ........
0078: 70 00 02 00 00 00 00 0a p.......
0080: 00 00 00 00 3a 00 00 00 ....:...
0088: 00 00 00 00 00 00 00 00 ........



Event Type: Warning
Event Source: Cdrom
Event Category: None
Event ID: 51
Date: 1/21/2006
Time: 9:52:18 PM
User: N/A
Computer: DAVID-5BDAB6674
Description:
An error was detected on device \Device\CdRom1 during a paging operation.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 03 00 68 00 01 00 b8 00 ..h...¸.
0008: 00 00 00 00 33 00 04 80 ....3..?
0010: 2d 01 00 00 00 00 00 00 -.......
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 85 71 00 00 00 00 ..?q....
0028: 68 65 03 00 00 00 00 00 he......
0030: ff ff ff ff 03 00 00 00 ÿÿÿÿ....
0038: 40 00 00 c4 02 00 01 00 @..Ä....
0040: 00 20 0a 12 48 02 00 40 . ..H..@
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 00 00 20 87 18 82 .... ?.?
0058: 00 00 00 00 08 d0 10 82 .....Ð.?
0060: 02 00 00 00 a0 30 0e 00 .... 0..
0068: 28 00 00 0e 30 a0 00 00 (...0 ..
0070: 02 00 00 00 00 00 00 00 ........
0078: 70 00 0b 00 00 00 00 0a p.......
0080: 00 00 00 00 5a 01 00 00 ....Z...
0088: 00 00 00 00 00 00 00 00 ........









> Dave
>
> Please check Event Viewer for Warning / Error Reports in the System and
> Application logs for the last boot and post copies.
>
> You can access Event Viewer by selecting Start, Administrative Tools,
> Event Viewer. When researching the meaning of the error, information
> regarding Event ID, Source and Description are important.
>
> HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
> http://support.microsoft.com/default.aspx?scid=kb;en-us;308427&Product=winxp
>
> A tip for posting copies of Error Reports! Run Event Viewer and double
> click on the error you want to copy. In the window, which appears is a
> button resembling two pages. Double click the button and close Event
> Viewer. Now start your message (email) and do a paste into the body of
> the message. This will paste the info from the Event Viewer Error Report
> complete with links into the message. Make sure this is the first paste
> after exiting from Event Viewer.
>
>
>
> --
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
>
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
> "dave" <dave@xxxxxxxxxxxxxxxxxx> wrote in message
> news:%23SBNLbuHGHA.3728@xxxxxxxxxxxxxxxxxxxxxxx
>> Hello
>>
>> I had a problem with what must have been an undetected virus.
>>
>> Today when I tried to start up my PC it failed to boot.
>> It got as far as a blue screen that disappeared very quickly and the PC
>> shut down before it had fully booted.
>>
>> I went through this process many times, so that I could read what was
>> written on the blue screen (I managed one word at a time).
>>
>> "A problem has been detected and Windows has been shut down to prevent
>> damage to your computer" was the gist of the message - and then something
>> about "unmountable...boot..." I think.
>>
>> In desperation, I reset my PC to the factory settings.
>>
>> I am now up and running but things don't seem the same:
>>
>> A) My keyboard has gone a bit haywire and the " key now writes as @ and
>> vice-versa.
>>
>> B) The time on my PC reset itself 8 hours slow.
>>
>> C) The main problem is a very slow "frame-rate" for want of a better
>> phrase.
>> Whenever I scroll up and down on a web page or even within this email, I
>> get a line across the screen and the movement up and down the page is
>> very slow and jerky.
>>
>> Could someone please advise me on any of these issues, but mainly the
>> slow frame-rate?
>> If I can get that back to it's previous fast pace, I will be much
>> happier.
>>
>> regards
>>
>> Dave
>>
>>
>
>


.

Quantcast