rabbit wrote: > Does any one knows how to restore lost storage from RAID 5 (with 2
> Hard drives) explain when I installed Windows XP Pro the RAID was
> working fine hard drive storage was visible and partioned all of a
> sudden RAID drive dissappear and
> no longer Accessible and do not know how to restore it. I am not sure
> if happened after started installing service packs 1 & 2. another
> things that I have noticed is that IRQ used when first installed was
> 15 now is 5 when ADAPTED SCSI CARD boots. used to show IRQ 15 now is
> IRQ have no idea what's going on.
>
> TIA
RAID 5 needs a minumum of 3 drives. Did one of the drives quit working or
did you setup a different RAID configuration with 2 drives? With 2 drives
you could use RAID 0, 1, 0+1, 1+0 or jbod.
Re: Hilfe: bei linux software raid5 2!! Platten rausgeflogen ...ATA drives being 'dropped' from a RAID volume was a commonly heard ... all error recovery; while RAID cards are /also/ programmed to take ... realize TLER-capable hard drives should not be used in non-RAID ... (de.comp.hardware.laufwerke.festplatten)
Re: GHOST RAID 1 to 0 ... Check the docs for the RAID controller or phone Dell technical support. ... The problem is that if I disable the Dell PERC 5/i the server does not see any of the physical drives and I believe that there are only 2 onboard SATA controllers so a multi-drive environment would not work in this environment. ... The client would like everything on seperate hard drives ie) OS (Mirrored ... (microsoft.public.windows.server.general)
Re: GHOST RAID 1 to 0 ... If I could the client would like no raid at all just separate physical disks as stated below. ... The problem is that if I disable the Dell PERC 5/i the server does not see any of the physical drives and I believe that there are only 2 onboard SATA controllers so a multi-drive environment would not work in this environment. ... The client would like everything on seperate hard drives ie) OS (Mirrored ... (microsoft.public.windows.server.general)
Re: Disk partitioning question ... A hardware RAID Volume may exist without any RAID Drives on it. ... > This single array will show up as Disk 0 in Windows Disk Manager.... (microsoft.public.windows.server.sbs)
Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID ... > like a fresh install and porting their application and data to the new system. ...PERC4/Di RAID on the motherboard, Dell DLT tape drive, Dell slimline ... PATA connector usable for two PATA drives.... After downloading drivers from both SCO and Dell to create the ... (comp.unix.sco.misc)
