Re: Just cannot connect via ICS



from TCP/IP properties:

Obtain IP address automatically

Use the following DNS server addresses:
ISPs primary address
ISPs secondary address

see if that helps

rgds
Robert


"babaton" <babaton@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FCE4A418-AF83-48A0-BB8B-A7A13941A52C@xxxxxxxxxxxxxxxx
> HI,
>
> I setup an xp PC yesterday, which connected to the web via ICS perfectly.
> Today I setup another PC again running xp, however I just cannot get on
> the
> web.
>
> I can ping the ICS PC, traceroute to any website i please as well as
> nslookup.
>
> However If I try to browse to a web page I get the DNS error page each
> time.
> I think I've seen this before on a fresh XP install but can't remember
> what
> the problem was.
>
> I've tried reinstalling my network card and running network setup wizard
> but
> to no avail.
>
> DO I even need to run the wizard? I thought it was enought to enter the
> ICS
> Pcs ip addy in the 2nd pcs gateway field, make sure its on the same subnet
> for ip and enter the dns servers.
>
> Pleasse help, confused.................


.



Relevant Pages

  • Re: creating a workgroup to share a folder
    ... Primary DNS Server = 192.168.0.1 ... CALADAN and the SiS connection on aarakis to obtain an IP and DNS address ... automatically - that's the way ICS is supposed to work. ... > Ethernet adapter Local Area Connection 2: ...
    (microsoft.public.win2000.networking)
  • Re: problem with AD dns auto registration and subdomain
    ... > I am trying to setup 2 dc's for a child domain, ... The 2nd dc was setup off site at the child domain ... > DNS server '192.168.0.1' failed. ... > I have tried removing and re-creating the zone on the dns server. ...
    (microsoft.public.win2000.dns)
  • Re: Exam 70-291
    ... The real DNS server IS running, ... ICS server will send the registration request to ISP's servers??? ... The dialup is an interface, which ICS needs two to work. ... so you will not get DHCP conflicts. ...
    (microsoft.public.windows.server.dns)
  • Re: IP addressing
    ... The reason I wanted to automatically enable the LAN is that sometimes the ... ICS PC gets unhooked and not hooked up correctly the first time. ... >>Do the clients use the ICS address as their DNS server? ... > The LAN connection enables itself automatically a short time, ...
    (microsoft.public.windowsxp.network_web)
  • ICS problem
    ... I would first check that the gateway in the ICS computer ... Then I would check the DNS server and ... >I have perfect LAN access to shared resources but the ... >resource printer access but the internet takes almost 5 ...
    (microsoft.public.windowsxp.network_web)