> begin trojan.vbs ... On Tuesday 30 August 2005 01:57 pm, Daddio had
> this to say in microsoft.public.windowsxp.general:
>
>> Have a buddies PC, connected to my wireless router, that works
>> perfectly, but cannot get any web pages or broswe at all, used Kellys
>> winsock repair utility no help, cleaned up some malware still no
>> help, running SP2
>>
>> Also cannot connect to any instant messengers or receive emails
>> through outlook express
>
> Have you defined the gateway for this system? It's typically the ip
> address of your router.
>
>
In addition to the good advice to check the gateway, check the DNS
settings on your friend's computer. Either set them to automatic or use
yours. You can also try:
Start>Run>cmd [enter]
ipconfig /flushdns [enter]
Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
.
Re: Problem setting up workgroup between laptop and main computer ...router, and the other Router is a Linksys WRT54g running DD-WRT setup ...Buffalo Wireless Router can not be plugged into a Tel. line, ... I've got a Buffalo wireless router plugged into my phone line. ... My main computer's IP 192.168.1.170 and its default gateway... (microsoft.public.windowsxp.network_web)
Re: Network gateway changed in DHCP and Network Properties ... Cisco PIX connects us to the internet and is the normal gateway....Ethernet adapter Server Local Area Connection:... Is this SBS 2003 Premium or Standard?... Is the wireless router supposed to be acting as an Access Point for LAN ... (microsoft.public.windows.server.sbs)
Re: Network gateway changed in DHCP and Network Properties ... does the wireless router have DHCP enabled?...Merv Porter [SBS-MVP]... Cisco PIX connects us to the internet and is the normal gateway.... Is the wireless router supposed to be acting as an Access Point for LAN ... (microsoft.public.windows.server.sbs)
Re: HPNA Network.. ... This always worked very well for me until I removed them to try some other types of networks.... I remember that the setup automatically set up the IP and such for the gateway and the remotes all connected automatically. ... I installed the HPNA adapters and drivers and they all show as functioning, but when trying to set up ICS on the PC that will act as the gateway, it won't set up ICS...keeps indicating that the 192.168.0.1 IP that it needs is already in use. ... Perhaps the NIC on the gateway PC needs to have its IP changed..or could it be that the wireless router IP is lingering even though it is no longer connected. ... (alt.internet.wireless)
Re: configuring ppp and lan ... Since your wireless router is not connected to the internet, ... is dhclient not pppd that is rewriting the routes, ... And the router is the gateway for 192.168.133.x ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ... (Debian-User)
