Re: Windows can't boot up

Be sure your Windows is not an OEM edition, which if true, is tied to your old hardware.
Be sure you have a Windows XP CD. Preferably a slipstream CD with service pack 2.

Due to XP's architecture, whenever the motherboard or cpu change (typically a hardware upgrade), one needs to do a repair install.
Follow these tips.

Only if you have a "full" XP CD ----
The object of this exercise is to do an in-place upgrade or an in-place installation for purposes of "repair".
It needs to go to the same partition as before , and the same directory as before.

Usually for example XP is on C drive and is on folder/directory \Windows or \WINNT.

Configure your computer to start from the CD-ROM drive. You do that from the pc BIOS setup screen. You specify CDROM as the first drive to boot from.

Insert your Windows XP CD into your CD-ROM drive, and then restart your pc.

When the "Press any key to boot from CD" message is displayed on your
screen, press a key to boot pc from the XP CD.

When you see the following message displayed on the Welcome to Setup screen,
press ENTER:
To setup Windows XP now, press ENTER.

At this point an option to press R to enter the Recovery Console is displayed. Do NOT select this option.

On the Windows XP Licensing Agreement screen, press F8 function key to agree to it.

Make sure that your current installation of Windows XP (in your case, the one you wish to repair) is selected in the box, and then press the R key to repair XP.

Follow the instructions on the screen.

--
Maurice N
MVP Windows - Shell / User
-----

Ponk wrote:
> I took my HD (windows xp OS) and put it in a different system
> (different Motherboard and CPU and graphics card). When I start up I
> can't get further than the startup screen (the one with the win XP
> logo and the horizontal moving bar)
>
> Is there any way I can get my system running without doing a fresh OS
> install?
>
> Thanks
.

Relevant Pages

  • TuxOS (Debian-Based)
    ... separate matter, whereupon the hardware detection ... tools (Linux, Windows, DOS, whatever) meant specifically ... or Debian or TuxOS. ... For a distro that wants to install ...
    (comp.os.linux.security)
  • Re: Start Menu, Icons Not Appearing
    ... Also, make sure your system has no malware, download, install and run Ad ... Assuming your system is set to boot from the CD-ROM drive, ... To Setup Windows XP now, ... To Repair a Windows XP Installation using Recovery Console press R. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Cannot Boot Into any Option for Safe Mode
    ... NTLDR and NTDETECT.COM from the original XP CD maybe help? ... How To Create a Boot Disk for an NTFS or FAT Partition in Windows XP ... An upgrade will probably not fix anything where a clean install might. ...
    (microsoft.public.windowsxp.newusers)
  • Re: WINDOWS XP WONT BOOT
    ... you can to a repair install but you cannot do it ... Now, if a retail disk doesn't work, you could install XP to a different ... When I rebooted, it told me to hit> any key to start CD ROM boot and then it went back into> the same old screen as I originally described. ... The disc I was using> was the Windows XP disc that came with my Dell but since I> bought it, the hard drive had to be changed and I now have ...
    (microsoft.public.windowsxp.accessibility)
  • Re: PLEASE HELP: 2 ERROR MESSAGES
    ... The advice to do a repair install, turned out to be a grievous and expensive ... The repair install caused a corruption and windows became ... It seems as though it would not boot from the CD ...
    (microsoft.public.windowsxp.general)